go 0x0 ## Starting application at 0x00000000 ... OpenSBI v1.0-527-gbbfd2c6 ____ _____ ____ _____ / __ \ / ____| _ \_ _| | | | |_ __ ___ _ __ | (___ | |_) || | | | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |__| | |_) | __/ | | |____) | |_) || |_ \____/| .__/ \___|_| |_|_____/|____/_____| | | |_| Platform Name : Canaan Kendryte K230 Platform Features : medeleg Platform HART Count : 1 Platform IPI Device : aclint-mswi Platform Timer Device : aclint-mtimer @ 27000000Hz Platform Console Device : uart8250 Platform HSM Device : --- Platform PMU Device : thead,c900-pmu Platform Reboot Device : --- Platform Shutdown Device : --- Platform Suspend Device : --- Platform CPPC Device : --- Firmware Base : 0x0 Firmware Size : 322 KB Firmware RW Offset : 0x40000 Firmware RW Size : 66 KB Firmware Heap Offset : 0x48000 Firmware Heap Size : 34 KB (total), 2 KB (reserved), 9 KB (used), 22 KB (free) Firmware Scratch Size : 4096 B (total), 336 B (used), 3760 B (free) Runtime SBI Version : 2.0 Domain0 Name : root Domain0 Boot HART : 0 Domain0 HARTs : 0* Domain0 Region00 : 0x0000000091400000-0x0000000091400fff M: (I,R,W) S/U: (R,W) Domain0 Region01 : 0x0000000f04008000-0x0000000f0400bfff M: (I,R,W) S/U: () Domain0 Region02 : 0x0000000f04000000-0x0000000f04007fff M: (I,R,W) S/U: () Domain0 Region03 : 0x0000000000040000-0x000000000005ffff M: (R,W) S/U: () Domain0 Region04 : 0x0000000000000000-0x000000000003ffff M: (R,X) S/U: () Domain0 Region05 : 0x0000000000000000-0xffffffffffffffff M: () S/U: (R,W,X) Domain0 Next Address : 0x0000000000200000 Domain0 Next Arg1 : 0x0000000002200000 Domain0 Next Mode : S-mode Domain0 SysReset : yes Domain0 SysSuspend : yes Boot HART ID : 0 Boot HART Domain : root Boot HART Priv Version : v1.12 Boot HART Base ISA : rv64imafdcbvx Boot HART ISA Extensions : sstc,zicntr,zihpm Boot HART PMP Reserved : 2 Boot HART PMP Count : 64 Boot HART PMP Granularity : 4096 Boot HART PMP Address Bits: 38 Boot HART MHPM Info : 16 (0x0007fff8) Boot HART MIDELEG : 0x0000000000020222 Boot HART MEDELEG : 0x000000000000b109 ** 4336 printk messages dropped ** [ 0.099371] [] of_platform_populate+0x36/0x86 [ 0.099376] [] of_platform_default_populate_init+0xbe/0xcc [ 0.099387] [] do_one_initcall+0x60/0x1f0 [ 0.099392] [] kernel_init_freeable+0x1d2/0x234 [ 0.099401] [] kernel_init+0x1e/0x112 [ 0.099407] [] ret_from_fork+0xe/0x1c [ 0.099414] ---[ end trace 0000000000000000 ]--- [ 0.099797] ------------[ cut here ]------------ [ 0.099804] k230-clk-composite 91100000.sysctl_clock:timer4_clk_src: device non-coherent but no non-coherent operations supported [ 0.099813] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.099828] Modules linked in: [ 0.099833] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.099839] Hardware name: Canaan Kendryte K230 (DT) [ 0.099841] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.099846] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.099851] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.099855] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff8161c618 [ 0.099859] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.099862] s1 : 0000000000000000 a0 : 0000000000000075 a1 : 0000000000000000 [ 0.099865] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.099868] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.099872] s2 : ffffffd801d6e410 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.099875] s5 : ffffffd81fdbf550 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.099879] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.099882] s11: 0000000000000000 t3 : ffffffff8180a6fc t4 : ffffffff8180a6fc [ 0.099885] t5 : ffffffff8180a6d8 t6 : ffffffff8180a77d [ 0.099888] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.099892] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.099898] [] of_dma_configure_id+0xf8/0x278 [ 0.099906] [] platform_dma_configure+0x44/0x5a [ 0.099915] [] really_probe+0x54/0x23e [ 0.099920] [] __driver_probe_device+0x5c/0xda [ 0.099926] [] driver_probe_device+0x2c/0xf8 [ 0.099931] [] __device_attach_driver+0x6e/0xd0 [ 0.099937] [] bus_for_each_drv+0x64/0xba [ 0.099941] [] __device_attach+0x82/0x136 [ 0.099947] [] device_initial_probe+0xe/0x16 [ 0.099952] [] bus_probe_device+0x86/0x88 [ 0.099957] [] device_add+0x4e6/0x6ac [ 0.099966] [] of_device_add+0x22/0x30 [ 0.099971] [] of_platform_device_create_pdata+0x68/0x9e [ 0.099976] [] of_platform_bus_create+0x13a/0x192 [ 0.099981] [] of_platform_bus_create+0x164/0x192 [ 0.099987] [] of_platform_bus_create+0x164/0x192 [ 0.099992] [] of_platform_bus_create+0x164/0x192 [ 0.099997] [] of_platform_populate+0x36/0x86 [ 0.100002] [] of_platform_default_populate_init+0xbe/0xcc [ 0.100012] [] do_one_initcall+0x60/0x1f0 [ 0.100017] [] kernel_init_freeable+0x1d2/0x234 [ 0.100026] [] kernel_init+0x1e/0x112 [ 0.100032] [] ret_from_fork+0xe/0x1c [ 0.100039] ---[ end trace 0000000000000000 ]--- [ 0.100468] ------------[ cut here ]------------ [ 0.100475] k230-clk-composite 91100000.sysctl_clock:timer4_clk: device non-coherent but no non-coherent operations supported [ 0.100483] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.100498] Modules linked in: [ 0.100503] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.100509] Hardware name: Canaan Kendryte K230 (DT) [ 0.100512] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.100517] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.100522] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.100526] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff8161d590 [ 0.100530] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.100533] s1 : 0000000000000000 a0 : 0000000000000071 a1 : 0000000000000000 [ 0.100536] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.100539] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.100542] s2 : ffffffd801d6e810 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.100546] s5 : ffffffd81fdbfd90 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.100549] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.100552] s11: 0000000000000000 t3 : ffffffff8180b314 t4 : ffffffff8180b314 [ 0.100555] t5 : ffffffff8180b2f0 t6 : ffffffff8180b391 [ 0.100558] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.100562] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.100568] [] of_dma_configure_id+0xf8/0x278 [ 0.100576] [] platform_dma_configure+0x44/0x5a [ 0.100584] [] really_probe+0x54/0x23e [ 0.100590] [] __driver_probe_device+0x5c/0xda [ 0.100595] [] driver_probe_device+0x2c/0xf8 [ 0.100600] [] __device_attach_driver+0x6e/0xd0 [ 0.100605] [] bus_for_each_drv+0x64/0xba [ 0.100611] [] __device_attach+0x82/0x136 [ 0.100616] [] device_initial_probe+0xe/0x16 [ 0.100621] [] bus_probe_device+0x86/0x88 [ 0.100626] [] device_add+0x4e6/0x6ac [ 0.100635] [] of_device_add+0x22/0x30 [ 0.100640] [] of_platform_device_create_pdata+0x68/0x9e [ 0.100645] [] of_platform_bus_create+0x13a/0x192 [ 0.100650] [] of_platform_bus_create+0x164/0x192 [ 0.100655] [] of_platform_bus_create+0x164/0x192 [ 0.100660] [] of_platform_bus_create+0x164/0x192 [ 0.100665] [] of_platform_populate+0x36/0x86 [ 0.100670] [] of_platform_default_populate_init+0xbe/0xcc [ 0.100680] [] do_one_initcall+0x60/0x1f0 [ 0.100686] [] kernel_init_freeable+0x1d2/0x234 [ 0.100695] [] kernel_init+0x1e/0x112 [ 0.100700] [] ret_from_fork+0xe/0x1c [ 0.100707] ---[ end trace 0000000000000000 ]--- [ 0.101083] ------------[ cut here ]------------ [ 0.101122] k230-clk-composite 91100000.sysctl_clock:timer5_clk_src: device non-coherent but no non-coherent operations supported [ 0.101132] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.101147] Modules linked in: [ 0.101153] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.101159] Hardware name: Canaan Kendryte K230 (DT) [ 0.101161] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.101167] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.101172] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.101176] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff8161e508 [ 0.101180] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.101183] s1 : 0000000000000000 a0 : 0000000000000075 a1 : 0000000000000000 [ 0.101187] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.101190] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.101193] s2 : ffffffd801d6f010 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.101197] s5 : ffffffd81fdc0360 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.101200] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.101203] s11: 0000000000000000 t3 : ffffffff8180bf2c t4 : ffffffff8180bf2c [ 0.101207] t5 : ffffffff8180bf08 t6 : ffffffff8180bfad [ 0.101209] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.101213] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.101220] [] of_dma_configure_id+0xf8/0x278 [ 0.101227] [] platform_dma_configure+0x44/0x5a [ 0.101236] [] really_probe+0x54/0x23e [ 0.101241] [] __driver_probe_device+0x5c/0xda [ 0.101247] [] driver_probe_device+0x2c/0xf8 [ 0.101252] [] __device_attach_driver+0x6e/0xd0 [ 0.101257] [] bus_for_each_drv+0x64/0xba [ 0.101262] [] __device_attach+0x82/0x136 [ 0.101268] [] device_initial_probe+0xe/0x16 [ 0.101274] [] bus_probe_device+0x86/0x88 [ 0.101279] [] device_add+0x4e6/0x6ac [ 0.101287] [] of_device_add+0x22/0x30 [ 0.101293] [] of_platform_device_create_pdata+0x68/0x9e [ 0.101298] [] of_platform_bus_create+0x13a/0x192 [ 0.101303] [] of_platform_bus_create+0x164/0x192 [ 0.101309] [] of_platform_bus_create+0x164/0x192 [ 0.101313] [] of_platform_bus_create+0x164/0x192 [ 0.101319] [] of_platform_populate+0x36/0x86 [ 0.101324] [] of_platform_default_populate_init+0xbe/0xcc [ 0.101334] [] do_one_initcall+0x60/0x1f0 [ 0.101339] [] kernel_init_freeable+0x1d2/0x234 [ 0.101349] [] kernel_init+0x1e/0x112 [ 0.101354] [] ret_from_fork+0xe/0x1c [ 0.101361] ---[ end trace 0000000000000000 ]--- [ 0.101802] ------------[ cut here ]------------ [ 0.101809] k230-clk-composite 91100000.sysctl_clock:timer5_clk: device non-coherent but no non-coherent operations supported [ 0.101819] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.101833] Modules linked in: [ 0.101838] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.101844] Hardware name: Canaan Kendryte K230 (DT) [ 0.101846] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.101852] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.101857] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.101860] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff8161f480 [ 0.101864] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.101868] s1 : 0000000000000000 a0 : 0000000000000071 a1 : 0000000000000000 [ 0.101871] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.101874] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.101877] s2 : ffffffd801d6f410 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.101881] s5 : ffffffd81fdc0ba0 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.101885] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.101888] s11: 0000000000000000 t3 : ffffffff8180cb44 t4 : ffffffff8180cb44 [ 0.101891] t5 : ffffffff8180cb20 t6 : ffffffff8180cbc1 [ 0.101894] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.101897] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.101904] [] of_dma_configure_id+0xf8/0x278 [ 0.101911] [] platform_dma_configure+0x44/0x5a [ 0.101920] [] really_probe+0x54/0x23e [ 0.101925] [] __driver_probe_device+0x5c/0xda [ 0.101931] [] driver_probe_device+0x2c/0xf8 [ 0.101936] [] __device_attach_driver+0x6e/0xd0 [ 0.101941] [] bus_for_each_drv+0x64/0xba [ 0.101946] [] __device_attach+0x82/0x136 [ 0.101951] [] device_initial_probe+0xe/0x16 [ 0.101957] [] bus_probe_device+0x86/0x88 [ 0.101962] [] device_add+0x4e6/0x6ac [ 0.101970] [] of_device_add+0x22/0x30 [ 0.101975] [] of_platform_device_create_pdata+0x68/0x9e [ 0.101981] [] of_platform_bus_create+0x13a/0x192 [ 0.101986] [] of_platform_bus_create+0x164/0x192 [ 0.101991] [] of_platform_bus_create+0x164/0x192 [ 0.101996] [] of_platform_bus_create+0x164/0x192 [ 0.102000] [] of_platform_populate+0x36/0x86 [ 0.102006] [] of_platform_default_populate_init+0xbe/0xcc [ 0.102015] [] do_one_initcall+0x60/0x1f0 [ 0.102021] [] kernel_init_freeable+0x1d2/0x234 [ 0.102030] [] kernel_init+0x1e/0x112 [ 0.102035] [] ret_from_fork+0xe/0x1c [ 0.102042] ---[ end trace 0000000000000000 ]--- [ 0.102428] ------------[ cut here ]------------ [ 0.102436] k230-clk-composite 91100000.sysctl_clock:shrm_src: device non-coherent but no non-coherent operations supported [ 0.102445] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.102459] Modules linked in: [ 0.102465] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.102471] Hardware name: Canaan Kendryte K230 (DT) [ 0.102473] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.102479] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.102484] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.102488] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff816203f8 [ 0.102491] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.102495] s1 : 0000000000000000 a0 : 000000000000006f a1 : 0000000000000000 [ 0.102498] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.102501] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.102504] s2 : ffffffd801d6fc10 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.102508] s5 : ffffffd81fdc1170 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.102511] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.102514] s11: 0000000000000000 t3 : ffffffff8180d75c t4 : ffffffff8180d75c [ 0.102517] t5 : ffffffff8180d738 t6 : ffffffff8180d7d7 [ 0.102520] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.102523] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.102530] [] of_dma_configure_id+0xf8/0x278 [ 0.102537] [] platform_dma_configure+0x44/0x5a [ 0.102545] [] really_probe+0x54/0x23e [ 0.102551] [] __driver_probe_device+0x5c/0xda [ 0.102557] [] driver_probe_device+0x2c/0xf8 [ 0.102562] [] __device_attach_driver+0x6e/0xd0 [ 0.102567] [] bus_for_each_drv+0x64/0xba [ 0.102572] [] __device_attach+0x82/0x136 [ 0.102577] [] device_initial_probe+0xe/0x16 [ 0.102583] [] bus_probe_device+0x86/0x88 [ 0.102588] [] device_add+0x4e6/0x6ac [ 0.102596] [] of_device_add+0x22/0x30 [ 0.102601] [] of_platform_device_create_pdata+0x68/0x9e [ 0.102606] [] of_platform_bus_create+0x13a/0x192 [ 0.102611] [] of_platform_bus_create+0x164/0x192 [ 0.102616] [] of_platform_bus_create+0x164/0x192 [ 0.102621] [] of_platform_bus_create+0x164/0x192 [ 0.102626] [] of_platform_populate+0x36/0x86 [ 0.102631] [] of_platform_default_populate_init+0xbe/0xcc [ 0.102641] [] do_one_initcall+0x60/0x1f0 [ 0.102646] [] kernel_init_freeable+0x1d2/0x234 [ 0.102655] [] kernel_init+0x1e/0x112 [ 0.102661] [] ret_from_fork+0xe/0x1c [ 0.102668] ---[ end trace 0000000000000000 ]--- [ 0.103038] ------------[ cut here ]------------ [ 0.103045] k230-clk-composite 91100000.sysctl_clock:shrm_axis_clk_gate: device non-coherent but no non-coherent operations supported [ 0.103054] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.103068] Modules linked in: [ 0.103073] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.103080] Hardware name: Canaan Kendryte K230 (DT) [ 0.103082] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.103087] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.103092] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.103096] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81621370 [ 0.103100] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.103103] s1 : 0000000000000000 a0 : 0000000000000079 a1 : 0000000000000000 [ 0.103106] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.103110] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.103113] s2 : ffffffd801d70010 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.103117] s5 : ffffffd81fdc1c40 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.103121] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.103124] s11: 0000000000000000 t3 : ffffffff8180e36c t4 : ffffffff8180e36c [ 0.103127] t5 : ffffffff8180e348 t6 : ffffffff8180e3f1 [ 0.103130] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.103133] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.103140] [] of_dma_configure_id+0xf8/0x278 [ 0.103147] [] platform_dma_configure+0x44/0x5a [ 0.103155] [] really_probe+0x54/0x23e [ 0.103161] [] __driver_probe_device+0x5c/0xda [ 0.103167] [] driver_probe_device+0x2c/0xf8 [ 0.103172] [] __device_attach_driver+0x6e/0xd0 [ 0.103177] [] bus_for_each_drv+0x64/0xba [ 0.103182] [] __device_attach+0x82/0x136 [ 0.103188] [] device_initial_probe+0xe/0x16 [ 0.103193] [] bus_probe_device+0x86/0x88 [ 0.103198] [] device_add+0x4e6/0x6ac [ 0.103207] [] of_device_add+0x22/0x30 [ 0.103212] [] of_platform_device_create_pdata+0x68/0x9e [ 0.103218] [] of_platform_bus_create+0x13a/0x192 [ 0.103223] [] of_platform_bus_create+0x164/0x192 [ 0.103228] [] of_platform_bus_create+0x164/0x192 [ 0.103233] [] of_platform_bus_create+0x164/0x192 [ 0.103237] [] of_platform_populate+0x36/0x86 [ 0.103242] [] of_platform_default_populate_init+0xbe/0xcc [ 0.103252] [] do_one_initcall+0x60/0x1f0 [ 0.103258] [] kernel_init_freeable+0x1d2/0x234 [ 0.103266] [] kernel_init+0x1e/0x112 [ 0.103272] [] ret_from_fork+0xe/0x1c [ 0.103278] ---[ end trace 0000000000000000 ]--- [ 0.103693] ------------[ cut here ]------------ [ 0.103700] k230-clk-composite 91100000.sysctl_clock:decompress_aclk_gate: device non-coherent but no non-coherent operations supported [ 0.103708] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.103722] Modules linked in: [ 0.103728] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.103734] Hardware name: Canaan Kendryte K230 (DT) [ 0.103736] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.103741] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.103746] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.103750] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff816222e8 [ 0.103754] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.103757] s1 : 0000000000000000 a0 : 000000000000007b a1 : 0000000000000000 [ 0.103761] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.103764] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.103768] s2 : ffffffd801d70410 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.103771] s5 : ffffffd81fdc20e8 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.103775] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.103778] s11: 0000000000000000 t3 : ffffffff8180ef8c t4 : ffffffff8180ef8c [ 0.103781] t5 : ffffffff8180ef68 t6 : ffffffff8180f013 [ 0.103783] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.103787] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.103793] [] of_dma_configure_id+0xf8/0x278 [ 0.103801] [] platform_dma_configure+0x44/0x5a [ 0.103809] [] really_probe+0x54/0x23e [ 0.103814] [] __driver_probe_device+0x5c/0xda [ 0.103820] [] driver_probe_device+0x2c/0xf8 [ 0.103825] [] __device_attach_driver+0x6e/0xd0 [ 0.103830] [] bus_for_each_drv+0x64/0xba [ 0.103835] [] __device_attach+0x82/0x136 [ 0.103841] [] device_initial_probe+0xe/0x16 [ 0.103846] [] bus_probe_device+0x86/0x88 [ 0.103851] [] device_add+0x4e6/0x6ac [ 0.103860] [] of_device_add+0x22/0x30 [ 0.103865] [] of_platform_device_create_pdata+0x68/0x9e [ 0.103870] [] of_platform_bus_create+0x13a/0x192 [ 0.103875] [] of_platform_bus_create+0x164/0x192 [ 0.103880] [] of_platform_bus_create+0x164/0x192 [ 0.103885] [] of_platform_bus_create+0x164/0x192 [ 0.103891] [] of_platform_populate+0x36/0x86 [ 0.103896] [] of_platform_default_populate_init+0xbe/0xcc [ 0.103906] [] do_one_initcall+0x60/0x1f0 [ 0.103911] [] kernel_init_freeable+0x1d2/0x234 [ 0.103920] [] kernel_init+0x1e/0x112 [ 0.103926] [] ret_from_fork+0xe/0x1c [ 0.103932] ---[ end trace 0000000000000000 ]--- [ 0.104299] ------------[ cut here ]------------ [ 0.104306] k230-clk-composite 91100000.sysctl_clock:shrm_pclk: device non-coherent but no non-coherent operations supported [ 0.104315] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.104329] Modules linked in: [ 0.104334] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.104341] Hardware name: Canaan Kendryte K230 (DT) [ 0.104344] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.104349] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.104354] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.104358] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81623260 [ 0.104361] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.104365] s1 : 0000000000000000 a0 : 0000000000000070 a1 : 0000000000000000 [ 0.104368] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.104371] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.104375] s2 : ffffffd801d70c10 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.104378] s5 : ffffffd81fdc2590 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.104382] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.104385] s11: 0000000000000000 t3 : ffffffff8180fbac t4 : ffffffff8180fbac [ 0.104389] t5 : ffffffff8180fb88 t6 : ffffffff8180fc28 [ 0.104392] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.104396] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.104402] [] of_dma_configure_id+0xf8/0x278 [ 0.104409] [] platform_dma_configure+0x44/0x5a [ 0.104418] [] really_probe+0x54/0x23e [ 0.104424] [] __driver_probe_device+0x5c/0xda [ 0.104430] [] driver_probe_device+0x2c/0xf8 [ 0.104435] [] __device_attach_driver+0x6e/0xd0 [ 0.104440] [] bus_for_each_drv+0x64/0xba [ 0.104445] [] __device_attach+0x82/0x136 [ 0.104451] [] device_initial_probe+0xe/0x16 [ 0.104456] [] bus_probe_device+0x86/0x88 [ 0.104461] [] device_add+0x4e6/0x6ac [ 0.104469] [] of_device_add+0x22/0x30 [ 0.104474] [] of_platform_device_create_pdata+0x68/0x9e [ 0.104480] [] of_platform_bus_create+0x13a/0x192 [ 0.104485] [] of_platform_bus_create+0x164/0x192 [ 0.104490] [] of_platform_bus_create+0x164/0x192 [ 0.104495] [] of_platform_bus_create+0x164/0x192 [ 0.104500] [] of_platform_populate+0x36/0x86 [ 0.104505] [] of_platform_default_populate_init+0xbe/0xcc [ 0.104515] [] do_one_initcall+0x60/0x1f0 [ 0.104521] [] kernel_init_freeable+0x1d2/0x234 [ 0.104529] [] kernel_init+0x1e/0x112 [ 0.104534] [] ret_from_fork+0xe/0x1c [ 0.104541] ---[ end trace 0000000000000000 ]--- [ 0.104911] ------------[ cut here ]------------ [ 0.104919] k230-clk-composite 91100000.sysctl_clock:shrm_axim_clk_gate: device non-coherent but no non-coherent operations supported [ 0.104927] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.104941] Modules linked in: [ 0.104946] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.104952] Hardware name: Canaan Kendryte K230 (DT) [ 0.104954] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.104960] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.104964] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.104969] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff816241d8 [ 0.104972] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.104976] s1 : 0000000000000000 a0 : 0000000000000079 a1 : 0000000000000000 [ 0.104979] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.104982] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.104986] s2 : ffffffd801d71010 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.104989] s5 : ffffffd81fdc2ea0 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.104993] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.104996] s11: 0000000000000000 t3 : ffffffff818107c4 t4 : ffffffff818107c4 [ 0.105000] t5 : ffffffff818107a0 t6 : ffffffff81810849 [ 0.105003] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.105007] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.105013] [] of_dma_configure_id+0xf8/0x278 [ 0.105021] [] platform_dma_configure+0x44/0x5a [ 0.105029] [] really_probe+0x54/0x23e [ 0.105035] [] __driver_probe_device+0x5c/0xda [ 0.105041] [] driver_probe_device+0x2c/0xf8 [ 0.105046] [] __device_attach_driver+0x6e/0xd0 [ 0.105051] [] bus_for_each_drv+0x64/0xba [ 0.105056] [] __device_attach+0x82/0x136 [ 0.105062] [] device_initial_probe+0xe/0x16 [ 0.105068] [] bus_probe_device+0x86/0x88 [ 0.105072] [] device_add+0x4e6/0x6ac [ 0.105081] [] of_device_add+0x22/0x30 [ 0.105086] [] of_platform_device_create_pdata+0x68/0x9e [ 0.105092] [] of_platform_bus_create+0x13a/0x192 [ 0.105097] [] of_platform_bus_create+0x164/0x192 [ 0.105102] [] of_platform_bus_create+0x164/0x192 [ 0.105107] [] of_platform_bus_create+0x164/0x192 [ 0.105112] [] of_platform_populate+0x36/0x86 [ 0.105117] [] of_platform_default_populate_init+0xbe/0xcc [ 0.105127] [] do_one_initcall+0x60/0x1f0 [ 0.105133] [] kernel_init_freeable+0x1d2/0x234 [ 0.105141] [] kernel_init+0x1e/0x112 [ 0.105146] [] ret_from_fork+0xe/0x1c [ 0.105153] ---[ end trace 0000000000000000 ]--- [ 0.105613] ------------[ cut here ]------------ [ 0.105619] k230-clk-composite 91100000.sysctl_clock:gsdma_aclk_gate: device non-coherent but no non-coherent operations supported [ 0.105629] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.105644] Modules linked in: [ 0.105649] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.105655] Hardware name: Canaan Kendryte K230 (DT) [ 0.105657] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.105662] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.105667] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.105671] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81625150 [ 0.105675] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.105678] s1 : 0000000000000000 a0 : 0000000000000076 a1 : 0000000000000000 [ 0.105681] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.105685] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.105688] s2 : ffffffd801d71410 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.105692] s5 : ffffffd81fdc33b0 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.105695] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.105698] s11: 0000000000000000 t3 : ffffffff818113e4 t4 : ffffffff818113e4 [ 0.105701] t5 : ffffffff818113c0 t6 : ffffffff81811466 [ 0.105704] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.105707] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.105714] [] of_dma_configure_id+0xf8/0x278 [ 0.105722] [] platform_dma_configure+0x44/0x5a [ 0.105730] [] really_probe+0x54/0x23e [ 0.105736] [] __driver_probe_device+0x5c/0xda [ 0.105741] [] driver_probe_device+0x2c/0xf8 [ 0.105746] [] __device_attach_driver+0x6e/0xd0 [ 0.105751] [] bus_for_each_drv+0x64/0xba [ 0.105756] [] __device_attach+0x82/0x136 [ 0.105762] [] device_initial_probe+0xe/0x16 [ 0.105767] [] bus_probe_device+0x86/0x88 [ 0.105772] [] device_add+0x4e6/0x6ac [ 0.105780] [] of_device_add+0x22/0x30 [ 0.105785] [] of_platform_device_create_pdata+0x68/0x9e [ 0.105791] [] of_platform_bus_create+0x13a/0x192 [ 0.105796] [] of_platform_bus_create+0x164/0x192 [ 0.105800] [] of_platform_bus_create+0x164/0x192 [ 0.105805] [] of_platform_bus_create+0x164/0x192 [ 0.105810] [] of_platform_populate+0x36/0x86 [ 0.105815] [] of_platform_default_populate_init+0xbe/0xcc [ 0.105824] [] do_one_initcall+0x60/0x1f0 [ 0.105830] [] kernel_init_freeable+0x1d2/0x234 [ 0.105839] [] kernel_init+0x1e/0x112 [ 0.105844] [] ret_from_fork+0xe/0x1c [ 0.105851] ---[ end trace 0000000000000000 ]--- [ 0.106288] ------------[ cut here ]------------ [ 0.106295] k230-clk-composite 91100000.sysctl_clock:nonai2d_aclk_gate: device non-coherent but no non-coherent operations supported [ 0.106304] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.106318] Modules linked in: [ 0.106324] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.106330] Hardware name: Canaan Kendryte K230 (DT) [ 0.106332] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.106338] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.106342] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.106346] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff816260c8 [ 0.106350] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.106353] s1 : 0000000000000000 a0 : 0000000000000078 a1 : 0000000000000000 [ 0.106357] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.106360] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.106363] s2 : ffffffd801d71c10 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.106367] s5 : ffffffd81fdc3848 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.106370] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.106374] s11: 0000000000000000 t3 : ffffffff81811ffc t4 : ffffffff81811ffc [ 0.106377] t5 : ffffffff81811fd8 t6 : ffffffff81812080 [ 0.106380] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.106384] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.106391] [] of_dma_configure_id+0xf8/0x278 [ 0.106398] [] platform_dma_configure+0x44/0x5a [ 0.106407] [] really_probe+0x54/0x23e [ 0.106413] [] __driver_probe_device+0x5c/0xda [ 0.106418] [] driver_probe_device+0x2c/0xf8 [ 0.106423] [] __device_attach_driver+0x6e/0xd0 [ 0.106429] [] bus_for_each_drv+0x64/0xba [ 0.106434] [] __device_attach+0x82/0x136 [ 0.106439] [] device_initial_probe+0xe/0x16 [ 0.106445] [] bus_probe_device+0x86/0x88 [ 0.106450] [] device_add+0x4e6/0x6ac [ 0.106459] [] of_device_add+0x22/0x30 [ 0.106464] [] of_platform_device_create_pdata+0x68/0x9e [ 0.106470] [] of_platform_bus_create+0x13a/0x192 [ 0.106475] [] of_platform_bus_create+0x164/0x192 [ 0.106480] [] of_platform_bus_create+0x164/0x192 [ 0.106485] [] of_platform_bus_create+0x164/0x192 [ 0.106490] [] of_platform_populate+0x36/0x86 [ 0.106495] [] of_platform_default_populate_init+0xbe/0xcc [ 0.106505] [] do_one_initcall+0x60/0x1f0 [ 0.106511] [] kernel_init_freeable+0x1d2/0x234 [ 0.106520] [] kernel_init+0x1e/0x112 [ 0.106525] [] ret_from_fork+0xe/0x1c [ 0.106532] ---[ end trace 0000000000000000 ]--- [ 0.106968] ------------[ cut here ]------------ [ 0.106975] k230-clk-composite 91100000.sysctl_clock:pdma_aclk_gate: device non-coherent but no non-coherent operations supported [ 0.106984] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.106999] Modules linked in: [ 0.107004] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.107010] Hardware name: Canaan Kendryte K230 (DT) [ 0.107013] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.107018] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.107023] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.107027] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81627040 [ 0.107031] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.107034] s1 : 0000000000000000 a0 : 0000000000000075 a1 : 0000000000000000 [ 0.107037] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.107040] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.107044] s2 : ffffffd801d72410 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.107047] s5 : ffffffd81fdc3cf0 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.107051] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.107054] s11: 0000000000000000 t3 : ffffffff81812c1c t4 : ffffffff81812c1c [ 0.107057] t5 : ffffffff81812bf8 t6 : ffffffff81812c9d [ 0.107060] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.107064] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.107071] [] of_dma_configure_id+0xf8/0x278 [ 0.107078] [] platform_dma_configure+0x44/0x5a [ 0.107087] [] really_probe+0x54/0x23e [ 0.107092] [] __driver_probe_device+0x5c/0xda [ 0.107098] [] driver_probe_device+0x2c/0xf8 [ 0.107103] [] __device_attach_driver+0x6e/0xd0 [ 0.107109] [] bus_for_each_drv+0x64/0xba [ 0.107114] [] __device_attach+0x82/0x136 [ 0.107119] [] device_initial_probe+0xe/0x16 [ 0.107124] [] bus_probe_device+0x86/0x88 [ 0.107130] [] device_add+0x4e6/0x6ac [ 0.107138] [] of_device_add+0x22/0x30 [ 0.107143] [] of_platform_device_create_pdata+0x68/0x9e [ 0.107149] [] of_platform_bus_create+0x13a/0x192 [ 0.107154] [] of_platform_bus_create+0x164/0x192 [ 0.107159] [] of_platform_bus_create+0x164/0x192 [ 0.107164] [] of_platform_bus_create+0x164/0x192 [ 0.107169] [] of_platform_populate+0x36/0x86 [ 0.107174] [] of_platform_default_populate_init+0xbe/0xcc [ 0.107184] [] do_one_initcall+0x60/0x1f0 [ 0.107189] [] kernel_init_freeable+0x1d2/0x234 [ 0.107199] [] kernel_init+0x1e/0x112 [ 0.107204] [] ret_from_fork+0xe/0x1c [ 0.107211] ---[ end trace 0000000000000000 ]--- [ 0.107588] ------------[ cut here ]------------ [ 0.107595] k230-clk-composite 91100000.sysctl_clock:ddrc_core_clk: device non-coherent but no non-coherent operations supported [ 0.107604] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.107618] Modules linked in: [ 0.107623] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.107630] Hardware name: Canaan Kendryte K230 (DT) [ 0.107632] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.107637] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.107642] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.107646] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81627fb8 [ 0.107650] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.107654] s1 : 0000000000000000 a0 : 0000000000000074 a1 : 0000000000000000 [ 0.107657] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.107660] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.107663] s2 : ffffffd801d72c10 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.107667] s5 : ffffffd81fdc4188 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.107671] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.107673] s11: 0000000000000000 t3 : ffffffff81813834 t4 : ffffffff81813834 [ 0.107677] t5 : ffffffff81813810 t6 : ffffffff818138b4 [ 0.107679] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.107683] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.107689] [] of_dma_configure_id+0xf8/0x278 [ 0.107697] [] platform_dma_configure+0x44/0x5a [ 0.107705] [] really_probe+0x54/0x23e [ 0.107710] [] __driver_probe_device+0x5c/0xda [ 0.107716] [] driver_probe_device+0x2c/0xf8 [ 0.107721] [] __device_attach_driver+0x6e/0xd0 [ 0.107726] [] bus_for_each_drv+0x64/0xba [ 0.107731] [] __device_attach+0x82/0x136 [ 0.107736] [] device_initial_probe+0xe/0x16 [ 0.107742] [] bus_probe_device+0x86/0x88 [ 0.107747] [] device_add+0x4e6/0x6ac [ 0.107755] [] of_device_add+0x22/0x30 [ 0.107760] [] of_platform_device_create_pdata+0x68/0x9e [ 0.107766] [] of_platform_bus_create+0x13a/0x192 [ 0.107771] [] of_platform_bus_create+0x164/0x192 [ 0.107776] [] of_platform_bus_create+0x164/0x192 [ 0.107780] [] of_platform_bus_create+0x164/0x192 [ 0.107785] [] of_platform_populate+0x36/0x86 [ 0.107790] [] of_platform_default_populate_init+0xbe/0xcc [ 0.107800] [] do_one_initcall+0x60/0x1f0 [ 0.107806] [] kernel_init_freeable+0x1d2/0x234 [ 0.107815] [] kernel_init+0x1e/0x112 [ 0.107821] [] ret_from_fork+0xe/0x1c [ 0.107827] ---[ end trace 0000000000000000 ]--- [ 0.108225] ------------[ cut here ]------------ [ 0.108232] k230-clk-composite 91100000.sysctl_clock:ddrc_bypass_gate: device non-coherent but no non-coherent operations supported [ 0.108240] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.108254] Modules linked in: [ 0.108260] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.108266] Hardware name: Canaan Kendryte K230 (DT) [ 0.108268] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.108274] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.108279] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.108282] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81628f30 [ 0.108286] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.108289] s1 : 0000000000000000 a0 : 0000000000000077 a1 : 0000000000000000 [ 0.108293] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.108296] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.108299] s2 : ffffffd801d73010 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.108303] s5 : ffffffd81fdc4bd0 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.108306] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.108310] s11: 0000000000000000 t3 : ffffffff8181444c t4 : ffffffff8181444c [ 0.108313] t5 : ffffffff81814428 t6 : ffffffff818144cf [ 0.108316] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.108320] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.108327] [] of_dma_configure_id+0xf8/0x278 [ 0.108334] [] platform_dma_configure+0x44/0x5a [ 0.108343] [] really_probe+0x54/0x23e [ 0.108349] [] __driver_probe_device+0x5c/0xda [ 0.108354] [] driver_probe_device+0x2c/0xf8 [ 0.108360] [] __device_attach_driver+0x6e/0xd0 [ 0.108365] [] bus_for_each_drv+0x64/0xba [ 0.108370] [] __device_attach+0x82/0x136 [ 0.108376] [] device_initial_probe+0xe/0x16 [ 0.108381] [] bus_probe_device+0x86/0x88 [ 0.108387] [] device_add+0x4e6/0x6ac [ 0.108395] [] of_device_add+0x22/0x30 [ 0.108400] [] of_platform_device_create_pdata+0x68/0x9e [ 0.108406] [] of_platform_bus_create+0x13a/0x192 [ 0.108411] [] of_platform_bus_create+0x164/0x192 [ 0.108416] [] of_platform_bus_create+0x164/0x192 [ 0.108421] [] of_platform_bus_create+0x164/0x192 [ 0.108426] [] of_platform_populate+0x36/0x86 [ 0.108431] [] of_platform_default_populate_init+0xbe/0xcc [ 0.108441] [] do_one_initcall+0x60/0x1f0 [ 0.108446] [] kernel_init_freeable+0x1d2/0x234 [ 0.108455] [] kernel_init+0x1e/0x112 [ 0.108461] [] ret_from_fork+0xe/0x1c [ 0.108468] ---[ end trace 0000000000000000 ]--- [ 0.108838] ------------[ cut here ]------------ [ 0.108845] k230-clk-composite 91100000.sysctl_clock:ddrc_pclk: device non-coherent but no non-coherent operations supported [ 0.108854] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.108868] Modules linked in: [ 0.108873] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.108879] Hardware name: Canaan Kendryte K230 (DT) [ 0.108881] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.108887] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.108892] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.108895] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81629ea8 [ 0.108899] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.108902] s1 : 0000000000000000 a0 : 0000000000000070 a1 : 0000000000000000 [ 0.108905] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.108909] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.108912] s2 : ffffffd801d73410 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.108915] s5 : ffffffd81fdc5078 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.108919] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.108922] s11: 0000000000000000 t3 : ffffffff81815064 t4 : ffffffff81815064 [ 0.108926] t5 : ffffffff81815040 t6 : ffffffff818150e0 [ 0.108928] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.108932] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.108939] [] of_dma_configure_id+0xf8/0x278 [ 0.108947] [] platform_dma_configure+0x44/0x5a [ 0.108955] [] really_probe+0x54/0x23e [ 0.108961] [] __driver_probe_device+0x5c/0xda [ 0.108966] [] driver_probe_device+0x2c/0xf8 [ 0.108972] [] __device_attach_driver+0x6e/0xd0 [ 0.108977] [] bus_for_each_drv+0x64/0xba [ 0.108982] [] __device_attach+0x82/0x136 [ 0.108988] [] device_initial_probe+0xe/0x16 [ 0.108993] [] bus_probe_device+0x86/0x88 [ 0.108998] [] device_add+0x4e6/0x6ac [ 0.109006] [] of_device_add+0x22/0x30 [ 0.109011] [] of_platform_device_create_pdata+0x68/0x9e [ 0.109016] [] of_platform_bus_create+0x13a/0x192 [ 0.109022] [] of_platform_bus_create+0x164/0x192 [ 0.109027] [] of_platform_bus_create+0x164/0x192 [ 0.109032] [] of_platform_bus_create+0x164/0x192 [ 0.109036] [] of_platform_populate+0x36/0x86 [ 0.109041] [] of_platform_default_populate_init+0xbe/0xcc [ 0.109051] [] do_one_initcall+0x60/0x1f0 [ 0.109057] [] kernel_init_freeable+0x1d2/0x234 [ 0.109066] [] kernel_init+0x1e/0x112 [ 0.109071] [] ret_from_fork+0xe/0x1c [ 0.109078] ---[ end trace 0000000000000000 ]--- [ 0.109498] ------------[ cut here ]------------ [ 0.109504] k230-clk-composite 91100000.sysctl_clock:disp_hclk: device non-coherent but no non-coherent operations supported [ 0.109513] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.109527] Modules linked in: [ 0.109532] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.109538] Hardware name: Canaan Kendryte K230 (DT) [ 0.109541] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.109547] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.109552] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.109556] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff8162ae20 [ 0.109559] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.109563] s1 : 0000000000000000 a0 : 0000000000000070 a1 : 0000000000000000 [ 0.109565] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.109569] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.109572] s2 : ffffffd801d73810 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.109575] s5 : ffffffd81fdc5988 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.109579] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.109582] s11: 0000000000000000 t3 : ffffffff81815c7c t4 : ffffffff81815c7c [ 0.109585] t5 : ffffffff81815c58 t6 : ffffffff81815cf8 [ 0.109588] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.109592] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.109598] [] of_dma_configure_id+0xf8/0x278 [ 0.109605] [] platform_dma_configure+0x44/0x5a [ 0.109614] [] really_probe+0x54/0x23e [ 0.109619] [] __driver_probe_device+0x5c/0xda [ 0.109624] [] driver_probe_device+0x2c/0xf8 [ 0.109630] [] __device_attach_driver+0x6e/0xd0 [ 0.109635] [] bus_for_each_drv+0x64/0xba [ 0.109640] [] __device_attach+0x82/0x136 [ 0.109645] [] device_initial_probe+0xe/0x16 [ 0.109650] [] bus_probe_device+0x86/0x88 [ 0.109655] [] device_add+0x4e6/0x6ac [ 0.109664] [] of_device_add+0x22/0x30 [ 0.109669] [] of_platform_device_create_pdata+0x68/0x9e [ 0.109674] [] of_platform_bus_create+0x13a/0x192 [ 0.109679] [] of_platform_bus_create+0x164/0x192 [ 0.109684] [] of_platform_bus_create+0x164/0x192 [ 0.109689] [] of_platform_bus_create+0x164/0x192 [ 0.109694] [] of_platform_populate+0x36/0x86 [ 0.109699] [] of_platform_default_populate_init+0xbe/0xcc [ 0.109709] [] do_one_initcall+0x60/0x1f0 [ 0.109715] [] kernel_init_freeable+0x1d2/0x234 [ 0.109723] [] kernel_init+0x1e/0x112 [ 0.109729] [] ret_from_fork+0xe/0x1c [ 0.109736] ---[ end trace 0000000000000000 ]--- [ 0.110110] ------------[ cut here ]------------ [ 0.110117] k230-clk-composite 91100000.sysctl_clock:disp_aclk_gate: device non-coherent but no non-coherent operations supported [ 0.110125] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.110140] Modules linked in: [ 0.110145] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.110151] Hardware name: Canaan Kendryte K230 (DT) [ 0.110154] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.110159] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.110163] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.110167] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff8162bd98 [ 0.110171] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.110175] s1 : 0000000000000000 a0 : 0000000000000075 a1 : 0000000000000000 [ 0.110177] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.110181] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.110184] s2 : ffffffd801d73c10 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.110187] s5 : ffffffd81fdc6298 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.110191] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.110194] s11: 0000000000000000 t3 : ffffffff81816894 t4 : ffffffff81816894 [ 0.110197] t5 : ffffffff81816870 t6 : ffffffff81816915 [ 0.110199] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.110203] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.110209] [] of_dma_configure_id+0xf8/0x278 [ 0.110217] [] platform_dma_configure+0x44/0x5a [ 0.110225] [] really_probe+0x54/0x23e [ 0.110231] [] __driver_probe_device+0x5c/0xda [ 0.110237] [] driver_probe_device+0x2c/0xf8 [ 0.110242] [] __device_attach_driver+0x6e/0xd0 [ 0.110247] [] bus_for_each_drv+0x64/0xba [ 0.110252] [] __device_attach+0x82/0x136 [ 0.110257] [] device_initial_probe+0xe/0x16 [ 0.110263] [] bus_probe_device+0x86/0x88 [ 0.110268] [] device_add+0x4e6/0x6ac [ 0.110276] [] of_device_add+0x22/0x30 [ 0.110281] [] of_platform_device_create_pdata+0x68/0x9e [ 0.110287] [] of_platform_bus_create+0x13a/0x192 [ 0.110292] [] of_platform_bus_create+0x164/0x192 [ 0.110297] [] of_platform_bus_create+0x164/0x192 [ 0.110302] [] of_platform_bus_create+0x164/0x192 [ 0.110307] [] of_platform_populate+0x36/0x86 [ 0.110312] [] of_platform_default_populate_init+0xbe/0xcc [ 0.110322] [] do_one_initcall+0x60/0x1f0 [ 0.110328] [] kernel_init_freeable+0x1d2/0x234 [ 0.110337] [] kernel_init+0x1e/0x112 [ 0.110342] [] ret_from_fork+0xe/0x1c [ 0.110349] ---[ end trace 0000000000000000 ]--- [ 0.110723] ------------[ cut here ]------------ [ 0.110730] k230-clk-composite 91100000.sysctl_clock:disp_clkext: device non-coherent but no non-coherent operations supported [ 0.110739] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.110752] Modules linked in: [ 0.110757] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.110763] Hardware name: Canaan Kendryte K230 (DT) [ 0.110765] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.110771] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.110776] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.110779] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff8162cd10 [ 0.110783] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.110787] s1 : 0000000000000000 a0 : 0000000000000072 a1 : 0000000000000000 [ 0.110790] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.110793] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.110796] s2 : ffffffd801d74010 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.110799] s5 : ffffffd81fdc6730 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.110803] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.110806] s11: 0000000000000000 t3 : ffffffff818174ac t4 : ffffffff818174ac [ 0.110810] t5 : ffffffff81817488 t6 : ffffffff8181752a [ 0.110812] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.110816] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.110823] [] of_dma_configure_id+0xf8/0x278 [ 0.110830] [] platform_dma_configure+0x44/0x5a [ 0.110838] [] really_probe+0x54/0x23e [ 0.110844] [] __driver_probe_device+0x5c/0xda [ 0.110850] [] driver_probe_device+0x2c/0xf8 [ 0.110855] [] __device_attach_driver+0x6e/0xd0 [ 0.110861] [] bus_for_each_drv+0x64/0xba [ 0.110866] [] __device_attach+0x82/0x136 [ 0.110872] [] device_initial_probe+0xe/0x16 [ 0.110877] [] bus_probe_device+0x86/0x88 [ 0.110882] [] device_add+0x4e6/0x6ac [ 0.110891] [] of_device_add+0x22/0x30 [ 0.110896] [] of_platform_device_create_pdata+0x68/0x9e [ 0.110901] [] of_platform_bus_create+0x13a/0x192 [ 0.110906] [] of_platform_bus_create+0x164/0x192 [ 0.110912] [] of_platform_bus_create+0x164/0x192 [ 0.110916] [] of_platform_bus_create+0x164/0x192 [ 0.110921] [] of_platform_populate+0x36/0x86 [ 0.110927] [] of_platform_default_populate_init+0xbe/0xcc [ 0.110936] [] do_one_initcall+0x60/0x1f0 [ 0.110942] [] kernel_init_freeable+0x1d2/0x234 [ 0.110951] [] kernel_init+0x1e/0x112 [ 0.110956] [] ret_from_fork+0xe/0x1c [ 0.110963] ---[ end trace 0000000000000000 ]--- [ 0.111409] ------------[ cut here ]------------ [ 0.111416] k230-clk-composite 91100000.sysctl_clock:disp_gpu: device non-coherent but no non-coherent operations supported [ 0.111425] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.111440] Modules linked in: [ 0.111445] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.111451] Hardware name: Canaan Kendryte K230 (DT) [ 0.111453] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.111459] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.111463] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.111467] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff8162dc88 [ 0.111471] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.111474] s1 : 0000000000000000 a0 : 000000000000006f a1 : 0000000000000000 [ 0.111477] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.111481] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.111484] s2 : ffffffd801d74410 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.111488] s5 : ffffffd81fdc7040 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.111491] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.111494] s11: 0000000000000000 t3 : ffffffff818180c4 t4 : ffffffff818180c4 [ 0.111498] t5 : ffffffff818180a0 t6 : ffffffff8181813f [ 0.111501] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.111505] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.111511] [] of_dma_configure_id+0xf8/0x278 [ 0.111519] [] platform_dma_configure+0x44/0x5a [ 0.111528] [] really_probe+0x54/0x23e [ 0.111534] [] __driver_probe_device+0x5c/0xda [ 0.111539] [] driver_probe_device+0x2c/0xf8 [ 0.111545] [] __device_attach_driver+0x6e/0xd0 [ 0.111550] [] bus_for_each_drv+0x64/0xba [ 0.111555] [] __device_attach+0x82/0x136 [ 0.111560] [] device_initial_probe+0xe/0x16 [ 0.111566] [] bus_probe_device+0x86/0x88 [ 0.111571] [] device_add+0x4e6/0x6ac [ 0.111579] [] of_device_add+0x22/0x30 [ 0.111584] [] of_platform_device_create_pdata+0x68/0x9e [ 0.111590] [] of_platform_bus_create+0x13a/0x192 [ 0.111595] [] of_platform_bus_create+0x164/0x192 [ 0.111600] [] of_platform_bus_create+0x164/0x192 [ 0.111605] [] of_platform_bus_create+0x164/0x192 [ 0.111610] [] of_platform_populate+0x36/0x86 [ 0.111615] [] of_platform_default_populate_init+0xbe/0xcc [ 0.111625] [] do_one_initcall+0x60/0x1f0 [ 0.111631] [] kernel_init_freeable+0x1d2/0x234 [ 0.111640] [] kernel_init+0x1e/0x112 [ 0.111645] [] ret_from_fork+0xe/0x1c [ 0.111652] ---[ end trace 0000000000000000 ]--- [ 0.112064] ------------[ cut here ]------------ [ 0.112071] k230-clk-composite 91100000.sysctl_clock:dpipclk: device non-coherent but no non-coherent operations supported [ 0.112079] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.112093] Modules linked in: [ 0.112098] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.112104] Hardware name: Canaan Kendryte K230 (DT) [ 0.112106] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.112112] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.112117] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.112121] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff8162ec00 [ 0.112124] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.112128] s1 : 0000000000000000 a0 : 000000000000006e a1 : 0000000000000000 [ 0.112131] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.112134] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.112138] s2 : ffffffd801d74c10 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.112141] s5 : ffffffd81fdc79b8 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.112145] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.112147] s11: 0000000000000000 t3 : ffffffff81818cd4 t4 : ffffffff81818cd4 [ 0.112151] t5 : ffffffff81818cb0 t6 : ffffffff81818d4e [ 0.112154] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.112157] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.112164] [] of_dma_configure_id+0xf8/0x278 [ 0.112171] [] platform_dma_configure+0x44/0x5a [ 0.112180] [] really_probe+0x54/0x23e [ 0.112185] [] __driver_probe_device+0x5c/0xda [ 0.112191] [] driver_probe_device+0x2c/0xf8 [ 0.112196] [] __device_attach_driver+0x6e/0xd0 [ 0.112202] [] bus_for_each_drv+0x64/0xba [ 0.112206] [] __device_attach+0x82/0x136 [ 0.112212] [] device_initial_probe+0xe/0x16 [ 0.112217] [] bus_probe_device+0x86/0x88 [ 0.112222] [] device_add+0x4e6/0x6ac [ 0.112230] [] of_device_add+0x22/0x30 [ 0.112236] [] of_platform_device_create_pdata+0x68/0x9e [ 0.112241] [] of_platform_bus_create+0x13a/0x192 [ 0.112246] [] of_platform_bus_create+0x164/0x192 [ 0.112251] [] of_platform_bus_create+0x164/0x192 [ 0.112256] [] of_platform_bus_create+0x164/0x192 [ 0.112261] [] of_platform_populate+0x36/0x86 [ 0.112266] [] of_platform_default_populate_init+0xbe/0xcc [ 0.112276] [] do_one_initcall+0x60/0x1f0 [ 0.112282] [] kernel_init_freeable+0x1d2/0x234 [ 0.112291] [] kernel_init+0x1e/0x112 [ 0.112296] [] ret_from_fork+0xe/0x1c [ 0.112303] ---[ end trace 0000000000000000 ]--- [ 0.112684] ------------[ cut here ]------------ [ 0.112691] k230-clk-composite 91100000.sysctl_clock:disp_cfgclk: device non-coherent but no non-coherent operations supported [ 0.112699] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.112713] Modules linked in: [ 0.112718] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.112724] Hardware name: Canaan Kendryte K230 (DT) [ 0.112727] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.112732] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.112736] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.112740] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff8162fb78 [ 0.112744] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.112747] s1 : 0000000000000000 a0 : 0000000000000072 a1 : 0000000000000000 [ 0.112750] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.112754] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.112757] s2 : ffffffd801d75010 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.112761] s5 : ffffffd81fdc82b8 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.112764] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.112767] s11: 0000000000000000 t3 : ffffffff818198e4 t4 : ffffffff818198e4 [ 0.112770] t5 : ffffffff818198c0 t6 : ffffffff81819962 [ 0.112772] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.112776] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.112782] [] of_dma_configure_id+0xf8/0x278 [ 0.112790] [] platform_dma_configure+0x44/0x5a [ 0.112798] [] really_probe+0x54/0x23e [ 0.112804] [] __driver_probe_device+0x5c/0xda [ 0.112809] [] driver_probe_device+0x2c/0xf8 [ 0.112814] [] __device_attach_driver+0x6e/0xd0 [ 0.112820] [] bus_for_each_drv+0x64/0xba [ 0.112825] [] __device_attach+0x82/0x136 [ 0.112830] [] device_initial_probe+0xe/0x16 [ 0.112835] [] bus_probe_device+0x86/0x88 [ 0.112840] [] device_add+0x4e6/0x6ac [ 0.112848] [] of_device_add+0x22/0x30 [ 0.112853] [] of_platform_device_create_pdata+0x68/0x9e [ 0.112858] [] of_platform_bus_create+0x13a/0x192 [ 0.112863] [] of_platform_bus_create+0x164/0x192 [ 0.112868] [] of_platform_bus_create+0x164/0x192 [ 0.112873] [] of_platform_bus_create+0x164/0x192 [ 0.112877] [] of_platform_populate+0x36/0x86 [ 0.112883] [] of_platform_default_populate_init+0xbe/0xcc [ 0.112892] [] do_one_initcall+0x60/0x1f0 [ 0.112898] [] kernel_init_freeable+0x1d2/0x234 [ 0.112906] [] kernel_init+0x1e/0x112 [ 0.112912] [] ret_from_fork+0xe/0x1c [ 0.112918] ---[ end trace 0000000000000000 ]--- [ 0.113345] ------------[ cut here ]------------ [ 0.113351] k230-clk-composite 91100000.sysctl_clock:disp_refclk_gate: device non-coherent but no non-coherent operations supported [ 0.113360] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.113374] Modules linked in: [ 0.113379] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.113385] Hardware name: Canaan Kendryte K230 (DT) [ 0.113387] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.113393] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.113398] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.113402] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81630af0 [ 0.113406] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.113409] s1 : 0000000000000000 a0 : 0000000000000077 a1 : 0000000000000000 [ 0.113412] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.113415] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.113419] s2 : ffffffd801d75410 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.113422] s5 : ffffffd81fdc8bc8 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.113426] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.113429] s11: 0000000000000000 t3 : ffffffff8181a4fc t4 : ffffffff8181a4fc [ 0.113432] t5 : ffffffff8181a4d8 t6 : ffffffff8181a57f [ 0.113435] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.113439] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.113445] [] of_dma_configure_id+0xf8/0x278 [ 0.113453] [] platform_dma_configure+0x44/0x5a [ 0.113461] [] really_probe+0x54/0x23e [ 0.113467] [] __driver_probe_device+0x5c/0xda [ 0.113472] [] driver_probe_device+0x2c/0xf8 [ 0.113477] [] __device_attach_driver+0x6e/0xd0 [ 0.113483] [] bus_for_each_drv+0x64/0xba [ 0.113487] [] __device_attach+0x82/0x136 [ 0.113492] [] device_initial_probe+0xe/0x16 [ 0.113498] [] bus_probe_device+0x86/0x88 [ 0.113503] [] device_add+0x4e6/0x6ac [ 0.113511] [] of_device_add+0x22/0x30 [ 0.113516] [] of_platform_device_create_pdata+0x68/0x9e [ 0.113521] [] of_platform_bus_create+0x13a/0x192 [ 0.113526] [] of_platform_bus_create+0x164/0x192 [ 0.113531] [] of_platform_bus_create+0x164/0x192 [ 0.113536] [] of_platform_bus_create+0x164/0x192 [ 0.113541] [] of_platform_populate+0x36/0x86 [ 0.113546] [] of_platform_default_populate_init+0xbe/0xcc [ 0.113556] [] do_one_initcall+0x60/0x1f0 [ 0.113562] [] kernel_init_freeable+0x1d2/0x234 [ 0.113570] [] kernel_init+0x1e/0x112 [ 0.113576] [] ret_from_fork+0xe/0x1c [ 0.113582] ---[ end trace 0000000000000000 ]--- [ 0.113966] ------------[ cut here ]------------ [ 0.113973] k230-clk-composite 91100000.sysctl_clock:sec_pclk: device non-coherent but no non-coherent operations supported [ 0.113982] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.113995] Modules linked in: [ 0.114001] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.114007] Hardware name: Canaan Kendryte K230 (DT) [ 0.114009] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.114014] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.114019] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.114023] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81631a68 [ 0.114027] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.114030] s1 : 0000000000000000 a0 : 000000000000006f a1 : 0000000000000000 [ 0.114033] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.114037] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.114040] s2 : ffffffd801d75810 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.114044] s5 : ffffffd81fdc9070 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.114047] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.114050] s11: 0000000000000000 t3 : ffffffff8181b114 t4 : ffffffff8181b114 [ 0.114053] t5 : ffffffff8181b0f0 t6 : ffffffff8181b18f [ 0.114056] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.114060] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.114067] [] of_dma_configure_id+0xf8/0x278 [ 0.114074] [] platform_dma_configure+0x44/0x5a [ 0.114083] [] really_probe+0x54/0x23e [ 0.114089] [] __driver_probe_device+0x5c/0xda [ 0.114094] [] driver_probe_device+0x2c/0xf8 [ 0.114099] [] __device_attach_driver+0x6e/0xd0 [ 0.114105] [] bus_for_each_drv+0x64/0xba [ 0.114110] [] __device_attach+0x82/0x136 [ 0.114116] [] device_initial_probe+0xe/0x16 [ 0.114121] [] bus_probe_device+0x86/0x88 [ 0.114127] [] device_add+0x4e6/0x6ac [ 0.114135] [] of_device_add+0x22/0x30 [ 0.114140] [] of_platform_device_create_pdata+0x68/0x9e [ 0.114146] [] of_platform_bus_create+0x13a/0x192 [ 0.114151] [] of_platform_bus_create+0x164/0x192 [ 0.114156] [] of_platform_bus_create+0x164/0x192 [ 0.114161] [] of_platform_bus_create+0x164/0x192 [ 0.114167] [] of_platform_populate+0x36/0x86 [ 0.114172] [] of_platform_default_populate_init+0xbe/0xcc [ 0.114182] [] do_one_initcall+0x60/0x1f0 [ 0.114188] [] kernel_init_freeable+0x1d2/0x234 [ 0.114196] [] kernel_init+0x1e/0x112 [ 0.114202] [] ret_from_fork+0xe/0x1c [ 0.114209] ---[ end trace 0000000000000000 ]--- [ 0.114597] ------------[ cut here ]------------ [ 0.114604] k230-clk-composite 91100000.sysctl_clock:sec_fixclk: device non-coherent but no non-coherent operations supported [ 0.114613] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.114627] Modules linked in: [ 0.114631] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.114637] Hardware name: Canaan Kendryte K230 (DT) [ 0.114640] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.114645] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.114650] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.114654] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff816329e0 [ 0.114657] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.114661] s1 : 0000000000000000 a0 : 0000000000000071 a1 : 0000000000000000 [ 0.114664] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.114667] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.114671] s2 : ffffffd801d75c10 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.114674] s5 : ffffffd81fdc9980 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.114678] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.114681] s11: 0000000000000000 t3 : ffffffff8181bd24 t4 : ffffffff8181bd24 [ 0.114684] t5 : ffffffff8181bd00 t6 : ffffffff8181bda1 [ 0.114687] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.114691] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.114698] [] of_dma_configure_id+0xf8/0x278 [ 0.114705] [] platform_dma_configure+0x44/0x5a [ 0.114713] [] really_probe+0x54/0x23e [ 0.114719] [] __driver_probe_device+0x5c/0xda [ 0.114725] [] driver_probe_device+0x2c/0xf8 [ 0.114730] [] __device_attach_driver+0x6e/0xd0 [ 0.114736] [] bus_for_each_drv+0x64/0xba [ 0.114741] [] __device_attach+0x82/0x136 [ 0.114746] [] device_initial_probe+0xe/0x16 [ 0.114751] [] bus_probe_device+0x86/0x88 [ 0.114757] [] device_add+0x4e6/0x6ac [ 0.114765] [] of_device_add+0x22/0x30 [ 0.114771] [] of_platform_device_create_pdata+0x68/0x9e [ 0.114776] [] of_platform_bus_create+0x13a/0x192 [ 0.114781] [] of_platform_bus_create+0x164/0x192 [ 0.114786] [] of_platform_bus_create+0x164/0x192 [ 0.114791] [] of_platform_bus_create+0x164/0x192 [ 0.114796] [] of_platform_populate+0x36/0x86 [ 0.114802] [] of_platform_default_populate_init+0xbe/0xcc [ 0.114811] [] do_one_initcall+0x60/0x1f0 [ 0.114817] [] kernel_init_freeable+0x1d2/0x234 [ 0.114826] [] kernel_init+0x1e/0x112 [ 0.114831] [] ret_from_fork+0xe/0x1c [ 0.114838] ---[ end trace 0000000000000000 ]--- [ 0.115232] ------------[ cut here ]------------ [ 0.115239] k230-clk-composite 91100000.sysctl_clock:sec_aclk_gate: device non-coherent but no non-coherent operations supported [ 0.115247] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.115261] Modules linked in: [ 0.115266] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.115272] Hardware name: Canaan Kendryte K230 (DT) [ 0.115274] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.115279] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.115284] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.115288] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81633958 [ 0.115292] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.115295] s1 : 0000000000000000 a0 : 0000000000000074 a1 : 0000000000000000 [ 0.115298] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.115301] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.115305] s2 : ffffffd801d76010 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.115308] s5 : ffffffd81fdca290 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.115311] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.115314] s11: 0000000000000000 t3 : ffffffff8181c93c t4 : ffffffff8181c93c [ 0.115317] t5 : ffffffff8181c918 t6 : ffffffff8181c9bc [ 0.115320] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.115324] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.115331] [] of_dma_configure_id+0xf8/0x278 [ 0.115338] [] platform_dma_configure+0x44/0x5a [ 0.115346] [] really_probe+0x54/0x23e [ 0.115352] [] __driver_probe_device+0x5c/0xda [ 0.115357] [] driver_probe_device+0x2c/0xf8 [ 0.115363] [] __device_attach_driver+0x6e/0xd0 [ 0.115368] [] bus_for_each_drv+0x64/0xba [ 0.115373] [] __device_attach+0x82/0x136 [ 0.115378] [] device_initial_probe+0xe/0x16 [ 0.115384] [] bus_probe_device+0x86/0x88 [ 0.115389] [] device_add+0x4e6/0x6ac [ 0.115397] [] of_device_add+0x22/0x30 [ 0.115402] [] of_platform_device_create_pdata+0x68/0x9e [ 0.115408] [] of_platform_bus_create+0x13a/0x192 [ 0.115413] [] of_platform_bus_create+0x164/0x192 [ 0.115418] [] of_platform_bus_create+0x164/0x192 [ 0.115423] [] of_platform_bus_create+0x164/0x192 [ 0.115428] [] of_platform_populate+0x36/0x86 [ 0.115434] [] of_platform_default_populate_init+0xbe/0xcc [ 0.115443] [] do_one_initcall+0x60/0x1f0 [ 0.115449] [] kernel_init_freeable+0x1d2/0x234 [ 0.115458] [] kernel_init+0x1e/0x112 [ 0.115463] [] ret_from_fork+0xe/0x1c [ 0.115470] ---[ end trace 0000000000000000 ]--- [ 0.115953] ------------[ cut here ]------------ [ 0.115960] k230-clk-composite 91100000.sysctl_clock:usb_clk100: device non-coherent but no non-coherent operations supported [ 0.115969] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.115984] Modules linked in: [ 0.115990] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.115995] Hardware name: Canaan Kendryte K230 (DT) [ 0.115998] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.116003] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.116008] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.116012] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff816348d0 [ 0.116015] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.116019] s1 : 0000000000000000 a0 : 0000000000000071 a1 : 0000000000000000 [ 0.116022] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.116025] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.116028] s2 : ffffffd801d76810 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.116032] s5 : ffffffd81fdcb4b0 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.116035] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.116038] s11: 0000000000000000 t3 : ffffffff8181d554 t4 : ffffffff8181d554 [ 0.116041] t5 : ffffffff8181d530 t6 : ffffffff8181d5d1 [ 0.116044] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.116048] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.116054] [] of_dma_configure_id+0xf8/0x278 [ 0.116063] [] platform_dma_configure+0x44/0x5a [ 0.116071] [] really_probe+0x54/0x23e [ 0.116077] [] __driver_probe_device+0x5c/0xda [ 0.116082] [] driver_probe_device+0x2c/0xf8 [ 0.116087] [] __device_attach_driver+0x6e/0xd0 [ 0.116093] [] bus_for_each_drv+0x64/0xba [ 0.116098] [] __device_attach+0x82/0x136 [ 0.116103] [] device_initial_probe+0xe/0x16 [ 0.116109] [] bus_probe_device+0x86/0x88 [ 0.116114] [] device_add+0x4e6/0x6ac [ 0.116122] [] of_device_add+0x22/0x30 [ 0.116127] [] of_platform_device_create_pdata+0x68/0x9e [ 0.116133] [] of_platform_bus_create+0x13a/0x192 [ 0.116138] [] of_platform_bus_create+0x164/0x192 [ 0.116143] [] of_platform_bus_create+0x164/0x192 [ 0.116148] [] of_platform_bus_create+0x164/0x192 [ 0.116153] [] of_platform_populate+0x36/0x86 [ 0.116158] [] of_platform_default_populate_init+0xbe/0xcc [ 0.116168] [] do_one_initcall+0x60/0x1f0 [ 0.116174] [] kernel_init_freeable+0x1d2/0x234 [ 0.116183] [] kernel_init+0x1e/0x112 [ 0.116188] [] ret_from_fork+0xe/0x1c [ 0.116195] ---[ end trace 0000000000000000 ]--- [ 0.116673] ------------[ cut here ]------------ [ 0.116681] k230-clk-composite 91100000.sysctl_clock:spi2axi_aclk: device non-coherent but no non-coherent operations supported [ 0.116689] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.116703] Modules linked in: [ 0.116708] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.116714] Hardware name: Canaan Kendryte K230 (DT) [ 0.116717] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.116722] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.116727] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.116731] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81635848 [ 0.116735] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.116738] s1 : 0000000000000000 a0 : 0000000000000073 a1 : 0000000000000000 [ 0.116741] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.116744] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.116748] s2 : ffffffd801d77010 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.116751] s5 : ffffffd81fdcc6d0 s6 : ffffffff817eca28 s7 : ffffffd801b48810 [ 0.116754] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.116757] s11: 0000000000000000 t3 : ffffffff8181e16c t4 : ffffffff8181e16c [ 0.116761] t5 : ffffffff8181e148 t6 : ffffffff8181e1eb [ 0.116763] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.116768] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.116774] [] of_dma_configure_id+0xf8/0x278 [ 0.116782] [] platform_dma_configure+0x44/0x5a [ 0.116790] [] really_probe+0x54/0x23e [ 0.116796] [] __driver_probe_device+0x5c/0xda [ 0.116801] [] driver_probe_device+0x2c/0xf8 [ 0.116807] [] __device_attach_driver+0x6e/0xd0 [ 0.116812] [] bus_for_each_drv+0x64/0xba [ 0.116817] [] __device_attach+0x82/0x136 [ 0.116822] [] device_initial_probe+0xe/0x16 [ 0.116828] [] bus_probe_device+0x86/0x88 [ 0.116833] [] device_add+0x4e6/0x6ac [ 0.116841] [] of_device_add+0x22/0x30 [ 0.116846] [] of_platform_device_create_pdata+0x68/0x9e [ 0.116851] [] of_platform_bus_create+0x13a/0x192 [ 0.116856] [] of_platform_bus_create+0x164/0x192 [ 0.116862] [] of_platform_bus_create+0x164/0x192 [ 0.116867] [] of_platform_bus_create+0x164/0x192 [ 0.116872] [] of_platform_populate+0x36/0x86 [ 0.116877] [] of_platform_default_populate_init+0xbe/0xcc [ 0.116887] [] do_one_initcall+0x60/0x1f0 [ 0.116893] [] kernel_init_freeable+0x1d2/0x234 [ 0.116902] [] kernel_init+0x1e/0x112 [ 0.116907] [] ret_from_fork+0xe/0x1c [ 0.116914] ---[ end trace 0000000000000000 ]--- [ 0.117416] ------------[ cut here ]------------ [ 0.117422] k230-sysctl-reset 91101000.sysctl_reset: device non-coherent but no non-coherent operations supported [ 0.117431] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.117446] Modules linked in: [ 0.117452] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.117458] Hardware name: Canaan Kendryte K230 (DT) [ 0.117460] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.117466] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.117470] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b870 [ 0.117474] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff816367c0 [ 0.117478] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b8a0 [ 0.117482] s1 : 0000000000000000 a0 : 0000000000000065 a1 : 0000000000000000 [ 0.117485] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.117488] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.117491] s2 : ffffffd801d77410 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.117495] s5 : ffffffd81fdccfe0 s6 : ffffffff817eca28 s7 : ffffffd801b48410 [ 0.117498] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.117501] s11: 0000000000000000 t3 : ffffffff8181ed84 t4 : ffffffff8181ed84 [ 0.117504] t5 : ffffffff8181ed60 t6 : ffffffff8181edf5 [ 0.117507] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.117511] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.117518] [] of_dma_configure_id+0xf8/0x278 [ 0.117525] [] platform_dma_configure+0x44/0x5a [ 0.117534] [] really_probe+0x54/0x23e [ 0.117540] [] __driver_probe_device+0x5c/0xda [ 0.117546] [] driver_probe_device+0x2c/0xf8 [ 0.117551] [] __device_attach_driver+0x6e/0xd0 [ 0.117557] [] bus_for_each_drv+0x64/0xba [ 0.117562] [] __device_attach+0x82/0x136 [ 0.117567] [] device_initial_probe+0xe/0x16 [ 0.117572] [] bus_probe_device+0x86/0x88 [ 0.117578] [] device_add+0x4e6/0x6ac [ 0.117586] [] of_device_add+0x22/0x30 [ 0.117592] [] of_platform_device_create_pdata+0x68/0x9e [ 0.117597] [] of_platform_bus_create+0x13a/0x192 [ 0.117602] [] of_platform_bus_create+0x164/0x192 [ 0.117608] [] of_platform_bus_create+0x164/0x192 [ 0.117613] [] of_platform_populate+0x36/0x86 [ 0.117618] [] of_platform_default_populate_init+0xbe/0xcc [ 0.117627] [] do_one_initcall+0x60/0x1f0 [ 0.117633] [] kernel_init_freeable+0x1d2/0x234 [ 0.117642] [] kernel_init+0x1e/0x112 [ 0.117647] [] ret_from_fork+0xe/0x1c [ 0.117655] ---[ end trace 0000000000000000 ]--- [ 0.117695] [K230_RESET]:sysctl reset phy addr 0x91101000 [ 0.117700] [K230_RESET]:k230_reset_probe ok! [ 0.118062] ------------[ cut here ]------------ [ 0.118067] k230-pll 91102000.sysctl_boot:pll0: device non-coherent but no non-coherent operations supported [ 0.118075] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.118087] Modules linked in: [ 0.118093] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.118098] Hardware name: Canaan Kendryte K230 (DT) [ 0.118100] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.118106] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.118110] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.118114] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81637790 [ 0.118118] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.118121] s1 : 0000000000000000 a0 : 0000000000000060 a1 : 0000000000000000 [ 0.118124] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.118128] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.118131] s2 : ffffffd801d78010 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.118134] s5 : ffffffd81fdcda00 s6 : ffffffff817eca28 s7 : ffffffd801d77c10 [ 0.118137] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.118141] s11: 0000000000000000 t3 : ffffffff8181f9ac t4 : ffffffff8181f9ac [ 0.118144] t5 : ffffffff8181f988 t6 : ffffffff8181fa18 [ 0.118146] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.118150] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.118157] [] of_dma_configure_id+0xf8/0x278 [ 0.118164] [] platform_dma_configure+0x44/0x5a [ 0.118172] [] really_probe+0x54/0x23e [ 0.118178] [] __driver_probe_device+0x5c/0xda [ 0.118183] [] driver_probe_device+0x2c/0xf8 [ 0.118189] [] __device_attach_driver+0x6e/0xd0 [ 0.118194] [] bus_for_each_drv+0x64/0xba [ 0.118199] [] __device_attach+0x82/0x136 [ 0.118204] [] device_initial_probe+0xe/0x16 [ 0.118210] [] bus_probe_device+0x86/0x88 [ 0.118215] [] device_add+0x4e6/0x6ac [ 0.118223] [] of_device_add+0x22/0x30 [ 0.118228] [] of_platform_device_create_pdata+0x68/0x9e [ 0.118233] [] of_platform_bus_create+0x13a/0x192 [ 0.118238] [] of_platform_bus_create+0x164/0x192 [ 0.118243] [] of_platform_bus_create+0x164/0x192 [ 0.118248] [] of_platform_bus_create+0x164/0x192 [ 0.118253] [] of_platform_populate+0x36/0x86 [ 0.118258] [] of_platform_default_populate_init+0xbe/0xcc [ 0.118268] [] do_one_initcall+0x60/0x1f0 [ 0.118273] [] kernel_init_freeable+0x1d2/0x234 [ 0.118282] [] kernel_init+0x1e/0x112 [ 0.118286] [] ret_from_fork+0xe/0x1c [ 0.118293] ---[ end trace 0000000000000000 ]--- [ 0.118829] ------------[ cut here ]------------ [ 0.118837] k230-pll 91102000.sysctl_boot:pll1: device non-coherent but no non-coherent operations supported [ 0.118845] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.118860] Modules linked in: [ 0.118866] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.118872] Hardware name: Canaan Kendryte K230 (DT) [ 0.118874] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.118880] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.118884] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.118888] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81638708 [ 0.118892] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.118896] s1 : 0000000000000000 a0 : 0000000000000060 a1 : 0000000000000000 [ 0.118899] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.118902] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.118906] s2 : ffffffd801d78c10 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.118909] s5 : ffffffd81fdcf130 s6 : ffffffff817eca28 s7 : ffffffd801d77c10 [ 0.118913] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.118916] s11: 0000000000000000 t3 : ffffffff818205b4 t4 : ffffffff818205b4 [ 0.118919] t5 : ffffffff81820590 t6 : ffffffff81820620 [ 0.118921] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.118925] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.118931] [] of_dma_configure_id+0xf8/0x278 [ 0.118939] [] platform_dma_configure+0x44/0x5a [ 0.118948] [] really_probe+0x54/0x23e [ 0.118954] [] __driver_probe_device+0x5c/0xda [ 0.118959] [] driver_probe_device+0x2c/0xf8 [ 0.118964] [] __device_attach_driver+0x6e/0xd0 [ 0.118970] [] bus_for_each_drv+0x64/0xba [ 0.118975] [] __device_attach+0x82/0x136 [ 0.118980] [] device_initial_probe+0xe/0x16 [ 0.118986] [] bus_probe_device+0x86/0x88 [ 0.118991] [] device_add+0x4e6/0x6ac [ 0.118999] [] of_device_add+0x22/0x30 [ 0.119005] [] of_platform_device_create_pdata+0x68/0x9e [ 0.119010] [] of_platform_bus_create+0x13a/0x192 [ 0.119015] [] of_platform_bus_create+0x164/0x192 [ 0.119021] [] of_platform_bus_create+0x164/0x192 [ 0.119026] [] of_platform_bus_create+0x164/0x192 [ 0.119031] [] of_platform_populate+0x36/0x86 [ 0.119036] [] of_platform_default_populate_init+0xbe/0xcc [ 0.119045] [] do_one_initcall+0x60/0x1f0 [ 0.119052] [] kernel_init_freeable+0x1d2/0x234 [ 0.119061] [] kernel_init+0x1e/0x112 [ 0.119066] [] ret_from_fork+0xe/0x1c [ 0.119073] ---[ end trace 0000000000000000 ]--- [ 0.119458] ------------[ cut here ]------------ [ 0.119465] k230-pll 91102000.sysctl_boot:pll2: device non-coherent but no non-coherent operations supported [ 0.119474] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.119488] Modules linked in: [ 0.119493] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.119500] Hardware name: Canaan Kendryte K230 (DT) [ 0.119502] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.119507] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.119512] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.119516] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81639680 [ 0.119520] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.119524] s1 : 0000000000000000 a0 : 0000000000000060 a1 : 0000000000000000 [ 0.119527] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.119530] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.119534] s2 : ffffffd801d79410 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.119537] s5 : ffffffd81fdd0790 s6 : ffffffff817eca28 s7 : ffffffd801d77c10 [ 0.119541] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.119544] s11: 0000000000000000 t3 : ffffffff818211bc t4 : ffffffff818211bc [ 0.119547] t5 : ffffffff81821198 t6 : ffffffff81821228 [ 0.119550] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.119554] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.119561] [] of_dma_configure_id+0xf8/0x278 [ 0.119568] [] platform_dma_configure+0x44/0x5a [ 0.119577] [] really_probe+0x54/0x23e [ 0.119583] [] __driver_probe_device+0x5c/0xda [ 0.119588] [] driver_probe_device+0x2c/0xf8 [ 0.119593] [] __device_attach_driver+0x6e/0xd0 [ 0.119599] [] bus_for_each_drv+0x64/0xba [ 0.119604] [] __device_attach+0x82/0x136 [ 0.119609] [] device_initial_probe+0xe/0x16 [ 0.119615] [] bus_probe_device+0x86/0x88 [ 0.119620] [] device_add+0x4e6/0x6ac [ 0.119628] [] of_device_add+0x22/0x30 [ 0.119633] [] of_platform_device_create_pdata+0x68/0x9e [ 0.119638] [] of_platform_bus_create+0x13a/0x192 [ 0.119644] [] of_platform_bus_create+0x164/0x192 [ 0.119649] [] of_platform_bus_create+0x164/0x192 [ 0.119654] [] of_platform_bus_create+0x164/0x192 [ 0.119659] [] of_platform_populate+0x36/0x86 [ 0.119664] [] of_platform_default_populate_init+0xbe/0xcc [ 0.119673] [] do_one_initcall+0x60/0x1f0 [ 0.119679] [] kernel_init_freeable+0x1d2/0x234 [ 0.119688] [] kernel_init+0x1e/0x112 [ 0.119693] [] ret_from_fork+0xe/0x1c [ 0.119700] ---[ end trace 0000000000000000 ]--- [ 0.120067] ------------[ cut here ]------------ [ 0.120074] k230-pll 91102000.sysctl_boot:pll3: device non-coherent but no non-coherent operations supported [ 0.120083] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.120097] Modules linked in: [ 0.120102] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.120108] Hardware name: Canaan Kendryte K230 (DT) [ 0.120111] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.120116] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.120121] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000b7d0 [ 0.120125] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff8163a5f8 [ 0.120129] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000b800 [ 0.120132] s1 : 0000000000000000 a0 : 0000000000000060 a1 : 0000000000000000 [ 0.120135] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.120138] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.120142] s2 : ffffffd801d79810 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.120145] s5 : ffffffd81fdd1df0 s6 : ffffffff817eca28 s7 : ffffffd801d77c10 [ 0.120149] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.120152] s11: 0000000000000000 t3 : ffffffff81801e1c t4 : ffffffff81801e1c [ 0.120156] t5 : ffffffff81801df8 t6 : ffffffff81801e88 [ 0.120158] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.120162] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.120169] [] of_dma_configure_id+0xf8/0x278 [ 0.120177] [] platform_dma_configure+0x44/0x5a [ 0.120186] [] really_probe+0x54/0x23e [ 0.120191] [] __driver_probe_device+0x5c/0xda [ 0.120197] [] driver_probe_device+0x2c/0xf8 [ 0.120202] [] __device_attach_driver+0x6e/0xd0 [ 0.120208] [] bus_for_each_drv+0x64/0xba [ 0.120213] [] __device_attach+0x82/0x136 [ 0.120219] [] device_initial_probe+0xe/0x16 [ 0.120224] [] bus_probe_device+0x86/0x88 [ 0.120229] [] device_add+0x4e6/0x6ac [ 0.120238] [] of_device_add+0x22/0x30 [ 0.120243] [] of_platform_device_create_pdata+0x68/0x9e [ 0.120248] [] of_platform_bus_create+0x13a/0x192 [ 0.120254] [] of_platform_bus_create+0x164/0x192 [ 0.120259] [] of_platform_bus_create+0x164/0x192 [ 0.120264] [] of_platform_bus_create+0x164/0x192 [ 0.120269] [] of_platform_populate+0x36/0x86 [ 0.120275] [] of_platform_default_populate_init+0xbe/0xcc [ 0.120284] [] do_one_initcall+0x60/0x1f0 [ 0.120290] [] kernel_init_freeable+0x1d2/0x234 [ 0.120299] [] kernel_init+0x1e/0x112 [ 0.120305] [] ret_from_fork+0xe/0x1c [ 0.120312] ---[ end trace 0000000000000000 ]--- [ 0.127261] ------------[ cut here ]------------ [ 0.127268] k230-powerdomain 91103000.sysctl_power: device non-coherent but no non-coherent operations supported [ 0.127279] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.127296] Modules linked in: [ 0.127302] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.127309] Hardware name: Canaan Kendryte K230 (DT) [ 0.127311] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.127317] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.127322] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000bb70 [ 0.127327] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff8163b570 [ 0.127331] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000bba0 [ 0.127334] s1 : 0000000000000000 a0 : 0000000000000064 a1 : 0000000000000000 [ 0.127338] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.127341] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.127345] s2 : ffffffd801d79c10 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.127348] s5 : ffffffd81fdd3450 s6 : ffffffd801dd02a8 s7 : ffffffff80e1a050 [ 0.127352] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.127355] s11: 0000000000000000 t3 : ffffffff81802a24 t4 : ffffffff81802a24 [ 0.127359] t5 : ffffffff81802a00 t6 : ffffffff81802a94 [ 0.127361] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.127365] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.127372] [] of_dma_configure_id+0xf8/0x278 [ 0.127380] [] platform_dma_configure+0x44/0x5a [ 0.127389] [] really_probe+0x54/0x23e [ 0.127395] [] __driver_probe_device+0x5c/0xda [ 0.127401] [] driver_probe_device+0x2c/0xf8 [ 0.127406] [] __driver_attach+0x6c/0x15a [ 0.127411] [] bus_for_each_dev+0x60/0xae [ 0.127416] [] driver_attach+0x1a/0x22 [ 0.127422] [] bus_add_driver+0xd0/0x1ba [ 0.127427] [] driver_register+0x3e/0xd8 [ 0.127433] [] __platform_driver_register+0x1c/0x24 [ 0.127440] [] k230_power_domain_init+0x1a/0x22 [ 0.127450] [] do_one_initcall+0x60/0x1f0 [ 0.127456] [] kernel_init_freeable+0x1d2/0x234 [ 0.127465] [] kernel_init+0x1e/0x112 [ 0.127470] [] ret_from_fork+0xe/0x1c [ 0.127477] ---[ end trace 0000000000000000 ]--- [ 0.127547] k230-powerdomain 91103000.sysctl_power: powerdomain init ok [ 0.127897] SCSI subsystem initialized [ 0.128022] usbcore: registered new interface driver usbfs [ 0.128043] usbcore: registered new interface driver hub [ 0.128069] usbcore: registered new device driver usb [ 0.128196] ------------[ cut here ]------------ [ 0.128199] i2c_designware 91405000.i2c: device non-coherent but no non-coherent operations supported [ 0.128209] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.128224] Modules linked in: [ 0.128230] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.128235] Hardware name: Canaan Kendryte K230 (DT) [ 0.128238] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.128244] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.128248] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000bb70 [ 0.128253] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff8163c438 [ 0.128256] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000bba0 [ 0.128260] s1 : 0000000000000000 a0 : 0000000000000059 a1 : 0000000000000000 [ 0.128263] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.128266] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.128270] s2 : ffffffd801b47410 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.128274] s5 : ffffffd81fd948a0 s6 : ffffffd801dd0c68 s7 : ffffffff80e1a0b0 [ 0.128278] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.128281] s11: 0000000000000000 t3 : ffffffff81803554 t4 : ffffffff81803554 [ 0.128284] t5 : ffffffff81803530 t6 : ffffffff818035b9 [ 0.128287] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.128291] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.128298] [] of_dma_configure_id+0xf8/0x278 [ 0.128306] [] platform_dma_configure+0x44/0x5a [ 0.128315] [] really_probe+0x54/0x23e [ 0.128321] [] __driver_probe_device+0x5c/0xda [ 0.128327] [] driver_probe_device+0x2c/0xf8 [ 0.128333] [] __driver_attach+0x6c/0x15a [ 0.128338] [] bus_for_each_dev+0x60/0xae [ 0.128343] [] driver_attach+0x1a/0x22 [ 0.128349] [] bus_add_driver+0xd0/0x1ba [ 0.128354] [] driver_register+0x3e/0xd8 [ 0.128361] [] __platform_driver_register+0x1c/0x24 [ 0.128368] [] dw_i2c_init_driver+0x1a/0x22 [ 0.128377] [] do_one_initcall+0x60/0x1f0 [ 0.128383] [] kernel_init_freeable+0x1d2/0x234 [ 0.128392] [] kernel_init+0x1e/0x112 [ 0.128397] [] ret_from_fork+0xe/0x1c [ 0.128404] ---[ end trace 0000000000000000 ]--- [ 0.128879] ------------[ cut here ]------------ [ 0.128883] i2c_designware 91409000.i2c: device non-coherent but no non-coherent operations supported [ 0.128892] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.128906] Modules linked in: [ 0.128911] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.128917] Hardware name: Canaan Kendryte K230 (DT) [ 0.128920] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.128925] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.128930] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000bb70 [ 0.128934] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff8163d300 [ 0.128938] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000bba0 [ 0.128941] s1 : 0000000000000000 a0 : 0000000000000059 a1 : 0000000000000000 [ 0.128945] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.128948] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.128951] s2 : ffffffd801b47810 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.128955] s5 : ffffffd81fd95ea0 s6 : ffffffd801dd0c68 s7 : ffffffff80e1a0b0 [ 0.128958] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.128961] s11: 0000000000000000 t3 : ffffffff81804124 t4 : ffffffff81804124 [ 0.128964] t5 : ffffffff81804100 t6 : ffffffff81804189 [ 0.128967] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.128971] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.128978] [] of_dma_configure_id+0xf8/0x278 [ 0.128986] [] platform_dma_configure+0x44/0x5a [ 0.128995] [] really_probe+0x54/0x23e [ 0.129001] [] __driver_probe_device+0x5c/0xda [ 0.129007] [] driver_probe_device+0x2c/0xf8 [ 0.129012] [] __driver_attach+0x6c/0x15a [ 0.129018] [] bus_for_each_dev+0x60/0xae [ 0.129023] [] driver_attach+0x1a/0x22 [ 0.129029] [] bus_add_driver+0xd0/0x1ba [ 0.129034] [] driver_register+0x3e/0xd8 [ 0.129041] [] __platform_driver_register+0x1c/0x24 [ 0.129047] [] dw_i2c_init_driver+0x1a/0x22 [ 0.129055] [] do_one_initcall+0x60/0x1f0 [ 0.129061] [] kernel_init_freeable+0x1d2/0x234 [ 0.129070] [] kernel_init+0x1e/0x112 [ 0.129075] [] ret_from_fork+0xe/0x1c [ 0.129082] ---[ end trace 0000000000000000 ]--- [ 0.129869] mc: Linux media interface: v0.10 [ 0.129928] videodev: Linux video capture interface: v2.00 [ 0.137651] clocksource: Switched to clocksource riscv_clocksource [ 0.148976] NET: Registered PF_INET protocol family [ 0.149100] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.149814] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.149832] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.149840] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.149867] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.150244] TCP: Hash tables configured (established 4096 bind 4096) [ 0.150307] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.150324] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.150440] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.158195] RPC: Registered named UNIX socket transport module. [ 0.158204] RPC: Registered udp transport module. [ 0.158207] RPC: Registered tcp transport module. [ 0.158210] RPC: Registered tcp-with-tls transport module. [ 0.158213] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.162529] Initialise system trusted keyrings [ 0.166084] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.169848] NFS: Registering the id_resolver key type [ 0.169888] Key type id_resolver registered [ 0.169892] Key type id_legacy registered [ 0.169910] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.169915] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.169940] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.169963] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.170033] fuse: init (API version 7.39) [ 0.170232] 9p: Installing v9fs 9p2000 file system support [ 0.170404] NET: Registered PF_ALG protocol family [ 0.170418] Key type asymmetric registered [ 0.170422] Asymmetric key parser 'x509' registered [ 0.170460] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.170465] io scheduler mq-deadline registered [ 0.170470] io scheduler kyber registered [ 0.170488] io scheduler bfq registered [ 0.174016] ------------[ cut here ]------------ [ 0.174024] simple-pm-bus soc: device non-coherent but no non-coherent operations supported [ 0.174034] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.174054] Modules linked in: [ 0.174060] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.174067] Hardware name: Canaan Kendryte K230 (DT) [ 0.174070] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.174075] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.174081] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000bb70 [ 0.174085] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff8163ee28 [ 0.174089] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000bba0 [ 0.174093] s1 : 0000000000000000 a0 : 000000000000004f a1 : 0000000000000000 [ 0.174096] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.174100] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.174103] s2 : ffffffd801b44c10 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.174106] s5 : ffffffd81fd8ca78 s6 : ffffffd80270d5a8 s7 : ffffffff80e1a590 [ 0.174110] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.174113] s11: 0000000000000000 t3 : ffffffff818055f4 t4 : ffffffff818055f4 [ 0.174116] t5 : ffffffff818055d0 t6 : ffffffff8180564f [ 0.174119] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.174124] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.174132] [] of_dma_configure_id+0xf8/0x278 [ 0.174141] [] platform_dma_configure+0x44/0x5a [ 0.174151] [] really_probe+0x54/0x23e [ 0.174157] [] __driver_probe_device+0x5c/0xda [ 0.174163] [] driver_probe_device+0x2c/0xf8 [ 0.174169] [] __driver_attach+0x6c/0x15a [ 0.174175] [] bus_for_each_dev+0x60/0xae [ 0.174180] [] driver_attach+0x1a/0x22 [ 0.174186] [] bus_add_driver+0xd0/0x1ba [ 0.174191] [] driver_register+0x3e/0xd8 [ 0.174197] [] __platform_driver_register+0x1c/0x24 [ 0.174204] [] simple_pm_bus_driver_init+0x1a/0x22 [ 0.174213] [] do_one_initcall+0x60/0x1f0 [ 0.174218] [] kernel_init_freeable+0x1d2/0x234 [ 0.174228] [] kernel_init+0x1e/0x112 [ 0.174233] [] ret_from_fork+0xe/0x1c [ 0.174240] ---[ end trace 0000000000000000 ]--- [ 0.174393] ------------[ cut here ]------------ [ 0.174397] simple-pm-bus soc:sysctl: device non-coherent but no non-coherent operations supported [ 0.174403] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.174414] Modules linked in: [ 0.174418] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.174424] Hardware name: Canaan Kendryte K230 (DT) [ 0.174426] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.174432] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.174437] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000bb70 [ 0.174440] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff8163fb38 [ 0.174444] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000bba0 [ 0.174447] s1 : 0000000000000000 a0 : 0000000000000056 a1 : 0000000000000000 [ 0.174450] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.174453] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.174457] s2 : ffffffd801b48410 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.174460] s5 : ffffffd81fd96e68 s6 : ffffffd80270d5a8 s7 : ffffffff80e1a590 [ 0.174464] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.174467] s11: 0000000000000000 t3 : ffffffff81805ff4 t4 : ffffffff81805ff4 [ 0.174471] t5 : ffffffff81805fd0 t6 : ffffffff81806056 [ 0.174474] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.174477] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.174484] [] of_dma_configure_id+0xf8/0x278 [ 0.174489] [] platform_dma_configure+0x44/0x5a [ 0.174498] [] really_probe+0x54/0x23e [ 0.174503] [] __driver_probe_device+0x5c/0xda [ 0.174509] [] driver_probe_device+0x2c/0xf8 [ 0.174514] [] __driver_attach+0x6c/0x15a [ 0.174520] [] bus_for_each_dev+0x60/0xae [ 0.174525] [] driver_attach+0x1a/0x22 [ 0.174530] [] bus_add_driver+0xd0/0x1ba [ 0.174535] [] driver_register+0x3e/0xd8 [ 0.174541] [] __platform_driver_register+0x1c/0x24 [ 0.174548] [] simple_pm_bus_driver_init+0x1a/0x22 [ 0.174556] [] do_one_initcall+0x60/0x1f0 [ 0.174561] [] kernel_init_freeable+0x1d2/0x234 [ 0.174569] [] kernel_init+0x1e/0x112 [ 0.174574] [] ret_from_fork+0xe/0x1c [ 0.174580] ---[ end trace 0000000000000000 ]--- [ 0.174641] ------------[ cut here ]------------ [ 0.174644] simple-pm-bus 91100000.sysctl_clock: device non-coherent but no non-coherent operations supported [ 0.174649] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.174658] Modules linked in: [ 0.174661] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.174666] Hardware name: Canaan Kendryte K230 (DT) [ 0.174668] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.174673] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.174678] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000bb70 [ 0.174682] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81640848 [ 0.174685] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000bba0 [ 0.174688] s1 : 0000000000000000 a0 : 0000000000000061 a1 : 0000000000000000 [ 0.174691] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.174694] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.174697] s2 : ffffffd801b48810 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.174701] s5 : ffffffd81fd971b8 s6 : ffffffd80270d5a8 s7 : ffffffff80e1a590 [ 0.174704] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.174707] s11: 0000000000000000 t3 : ffffffff818069fc t4 : ffffffff818069fc [ 0.174710] t5 : ffffffff818069d8 t6 : ffffffff81806a69 [ 0.174713] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.174716] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.174722] [] of_dma_configure_id+0xf8/0x278 [ 0.174728] [] platform_dma_configure+0x44/0x5a [ 0.174735] [] really_probe+0x54/0x23e [ 0.174740] [] __driver_probe_device+0x5c/0xda [ 0.174745] [] driver_probe_device+0x2c/0xf8 [ 0.174751] [] __driver_attach+0x6c/0x15a [ 0.174756] [] bus_for_each_dev+0x60/0xae [ 0.174761] [] driver_attach+0x1a/0x22 [ 0.174766] [] bus_add_driver+0xd0/0x1ba [ 0.174771] [] driver_register+0x3e/0xd8 [ 0.174777] [] __platform_driver_register+0x1c/0x24 [ 0.174783] [] simple_pm_bus_driver_init+0x1a/0x22 [ 0.174790] [] do_one_initcall+0x60/0x1f0 [ 0.174795] [] kernel_init_freeable+0x1d2/0x234 [ 0.174803] [] kernel_init+0x1e/0x112 [ 0.174808] [] ret_from_fork+0xe/0x1c [ 0.174814] ---[ end trace 0000000000000000 ]--- [ 0.175412] ------------[ cut here ]------------ [ 0.175419] simple-pm-bus 91102000.sysctl_boot: device non-coherent but no non-coherent operations supported [ 0.175428] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.175444] Modules linked in: [ 0.175450] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.175456] Hardware name: Canaan Kendryte K230 (DT) [ 0.175458] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.175464] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.175468] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000bb70 [ 0.175473] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81641558 [ 0.175476] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000bba0 [ 0.175480] s1 : 0000000000000000 a0 : 0000000000000060 a1 : 0000000000000000 [ 0.175483] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.175486] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.175489] s2 : ffffffd801d77c10 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.175493] s5 : ffffffd81fdcd348 s6 : ffffffd80270d5a8 s7 : ffffffff80e1a590 [ 0.175496] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.175500] s11: 0000000000000000 t3 : ffffffff81807414 t4 : ffffffff81807414 [ 0.175503] t5 : ffffffff818073f0 t6 : ffffffff81807480 [ 0.175506] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.175509] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.175516] [] of_dma_configure_id+0xf8/0x278 [ 0.175524] [] platform_dma_configure+0x44/0x5a [ 0.175532] [] really_probe+0x54/0x23e [ 0.175538] [] __driver_probe_device+0x5c/0xda [ 0.175543] [] driver_probe_device+0x2c/0xf8 [ 0.175549] [] __driver_attach+0x6c/0x15a [ 0.175554] [] bus_for_each_dev+0x60/0xae [ 0.175559] [] driver_attach+0x1a/0x22 [ 0.175564] [] bus_add_driver+0xd0/0x1ba [ 0.175569] [] driver_register+0x3e/0xd8 [ 0.175575] [] __platform_driver_register+0x1c/0x24 [ 0.175582] [] simple_pm_bus_driver_init+0x1a/0x22 [ 0.175591] [] do_one_initcall+0x60/0x1f0 [ 0.175597] [] kernel_init_freeable+0x1d2/0x234 [ 0.175605] [] kernel_init+0x1e/0x112 [ 0.175611] [] ret_from_fork+0xe/0x1c [ 0.175618] ---[ end trace 0000000000000000 ]--- [ 0.175731] ------------[ cut here ]------------ [ 0.175735] simple-pm-bus soc:security: device non-coherent but no non-coherent operations supported [ 0.175740] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.175750] Modules linked in: [ 0.175753] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.175758] Hardware name: Canaan Kendryte K230 (DT) [ 0.175760] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.175765] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.175770] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000bb70 [ 0.175773] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81642268 [ 0.175777] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000bba0 [ 0.175780] s1 : 0000000000000000 a0 : 0000000000000058 a1 : 0000000000000000 [ 0.175783] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.175786] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.175789] s2 : ffffffd801d7a410 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.175792] s5 : ffffffd81fdd3820 s6 : ffffffd80270d5a8 s7 : ffffffff80e1a590 [ 0.175796] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.175799] s11: 0000000000000000 t3 : ffffffff81807e2c t4 : ffffffff81807e2c [ 0.175802] t5 : ffffffff81807e08 t6 : ffffffff81807e90 [ 0.175805] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.175808] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.175814] [] of_dma_configure_id+0xf8/0x278 [ 0.175820] [] platform_dma_configure+0x44/0x5a [ 0.175827] [] really_probe+0x54/0x23e [ 0.175832] [] __driver_probe_device+0x5c/0xda [ 0.175838] [] driver_probe_device+0x2c/0xf8 [ 0.175843] [] __driver_attach+0x6c/0x15a [ 0.175848] [] bus_for_each_dev+0x60/0xae [ 0.175853] [] driver_attach+0x1a/0x22 [ 0.175858] [] bus_add_driver+0xd0/0x1ba [ 0.175863] [] driver_register+0x3e/0xd8 [ 0.175869] [] __platform_driver_register+0x1c/0x24 [ 0.175875] [] simple_pm_bus_driver_init+0x1a/0x22 [ 0.175883] [] do_one_initcall+0x60/0x1f0 [ 0.175888] [] kernel_init_freeable+0x1d2/0x234 [ 0.175896] [] kernel_init+0x1e/0x112 [ 0.175901] [] ret_from_fork+0xe/0x1c [ 0.175907] ---[ end trace 0000000000000000 ]--- [ 0.176924] k230-gpio 9140b000.gpio18: request hardlock 0 success! [ 0.176955] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.176977] gpio gpiochip0: (9140b000.gpio18): not an immutable chip, please consider fixing it! [ 0.186167] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.186189] gpio gpiochip1: (9140b000.gpio20): not an immutable chip, please consider fixing it! [ 0.186561] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.186583] gpio gpiochip2: (9140b000.gpio22): not an immutable chip, please consider fixing it! [ 0.186916] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.186935] gpio gpiochip3: (9140b000.gpio23): not an immutable chip, please consider fixing it! [ 0.187271] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.187291] gpio gpiochip4: (9140b000.gpio27): not an immutable chip, please consider fixing it! [ 0.187686] gpio gpiochip5: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.187707] gpio gpiochip5: (9140b000.gpio29): not an immutable chip, please consider fixing it! [ 0.189959] gpio gpiochip6: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.189980] gpio gpiochip6: (9140b000.gpio30): not an immutable chip, please consider fixing it! [ 0.190341] gpio gpiochip7: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.190361] gpio gpiochip7: (9140c000.gpio33): not an immutable chip, please consider fixing it! [ 0.190761] gpio gpiochip8: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.190780] gpio gpiochip8: (9140c000.gpio34): not an immutable chip, please consider fixing it! [ 0.194137] gpio gpiochip9: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.194159] gpio gpiochip9: (9140c000.gpio53): not an immutable chip, please consider fixing it! [ 0.315156] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled [ 0.323298] ------------[ cut here ]------------ [ 0.323306] dw-apb-uart 91400000.serial: device non-coherent but no non-coherent operations supported [ 0.323315] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 0.323332] Modules linked in: [ 0.323338] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 0.323344] Hardware name: Canaan Kendryte K230 (DT) [ 0.323347] epc : arch_setup_dma_ops+0x7a/0xa8 [ 0.323353] ra : arch_setup_dma_ops+0x7a/0xa8 [ 0.323358] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000bb70 [ 0.323362] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81643de8 [ 0.323366] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000bba0 [ 0.323370] s1 : 0000000000000000 a0 : 0000000000000059 a1 : 0000000000000000 [ 0.323373] a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000 [ 0.323376] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000030 [ 0.323380] s2 : ffffffd801b45410 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 0.323384] s5 : ffffffd81fd8dc90 s6 : ffffffd8027297e8 s7 : ffffffff80e1a628 [ 0.323387] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 0.323390] s11: 0000000000000000 t3 : ffffffff81809684 t4 : ffffffff81809684 [ 0.323393] t5 : ffffffff81809660 t6 : ffffffff818096e9 [ 0.323396] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.323399] [] arch_setup_dma_ops+0x7a/0xa8 [ 0.323407] [] of_dma_configure_id+0xf8/0x278 [ 0.323415] [] platform_dma_configure+0x44/0x5a [ 0.323424] [] really_probe+0x54/0x23e [ 0.323430] [] __driver_probe_device+0x5c/0xda [ 0.323435] [] driver_probe_device+0x2c/0xf8 [ 0.323441] [] __driver_attach+0x6c/0x15a [ 0.323446] [] bus_for_each_dev+0x60/0xae [ 0.323451] [] driver_attach+0x1a/0x22 [ 0.323456] [] bus_add_driver+0xd0/0x1ba [ 0.323461] [] driver_register+0x3e/0xd8 [ 0.323467] [] __platform_driver_register+0x1c/0x24 [ 0.323474] [] dw8250_platform_driver_init+0x1a/0x22 [ 0.323481] [] do_one_initcall+0x60/0x1f0 [ 0.323486] [] kernel_init_freeable+0x1d2/0x234 [ 0.323495] [] kernel_init+0x1e/0x112 [ 0.323501] [] ret_from_fork+0xe/0x1c [ 0.323508] ---[ end trace 0000000000000000 ]--- [ 0.324052] printk: legacy console [ttyS0] disabled [ 0.344472] 91400000.serial: ttyS0 at MMIO 0x91400000 (irq = 14, base_baud = 3125000) is a 16550A [ 0.344504] printk: legacy console [ttyS0] enabled [ 12.497775] loop: module loaded [ 12.501237] ------------[ cut here ]------------ [ 12.505886] dw_spi_mmio 91584000.spi: device non-coherent but no non-coherent operations supported [ 12.505897] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 12.505914] Modules linked in: [ 12.505920] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 12.505927] Hardware name: Canaan Kendryte K230 (DT) [ 12.505929] epc : arch_setup_dma_ops+0x7a/0xa8 [ 12.505935] ra : arch_setup_dma_ops+0x7a/0xa8 [ 12.505940] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000bb70 [ 12.505944] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81644fc8 [ 12.505947] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000bba0 [ 12.505951] s1 : 0000000000000000 a0 : 0000000000000056 a1 : ffffffff8167b920 [ 12.505954] a2 : 000000000000085b a3 : 0000000000000001 a4 : 0000000000000000 [ 12.505957] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000038 [ 12.505960] s2 : ffffffd801b46010 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 12.505963] s5 : ffffffd81fd908b0 s6 : ffffffd8029bc7e8 s7 : ffffffff80e1a6b8 [ 12.505966] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 12.505969] s11: 0000000000000000 t3 : ffffffff81800b67 t4 : ffffffff81800b67 [ 12.505972] t5 : ffffffff81800b68 t6 : ffffffc80000b988 [ 12.505975] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 12.505979] [] arch_setup_dma_ops+0x7a/0xa8 [ 12.505985] [] of_dma_configure_id+0xf8/0x278 [ 12.505993] [] platform_dma_configure+0x44/0x5a [ 12.506002] [] really_probe+0x54/0x23e [ 12.506008] [] __driver_probe_device+0x5c/0xda [ 12.506013] [] driver_probe_device+0x2c/0xf8 [ 12.506018] [] __driver_attach+0x6c/0x15a [ 12.506023] [] bus_for_each_dev+0x60/0xae [ 12.506028] [] driver_attach+0x1a/0x22 [ 12.506033] [] bus_add_driver+0xd0/0x1ba [ 12.506038] [] driver_register+0x3e/0xd8 [ 12.506044] [] __platform_driver_register+0x1c/0x24 [ 12.506050] [] dw_spi_mmio_driver_init+0x1a/0x22 [ 12.506058] [] do_one_initcall+0x60/0x1f0 [ 12.506064] [] kernel_init_freeable+0x1d2/0x234 [ 12.506072] [] kernel_init+0x1e/0x112 [ 12.506077] [] ret_from_fork+0xe/0x1c [ 12.506084] ---[ end trace 0000000000000000 ]--- [ 12.736446] dw_spi_mmio 91584000.spi: DMA init failed [ 12.741823] spi spi0.0: setup: ignoring unsupported mode bits 6000 [ 12.748382] spi-nor spi0.0: w25q256jw (32768 Kbytes) [ 12.753445] 11 fixed-partitions partitions found on MTD device spi0.0 [ 12.759901] Creating 11 MTD partitions on "spi0.0": [ 12.764791] 0x000000000000-0x000000080000 : "spl_boot" [ 12.770960] 0x000000080000-0x000000200000 : "uboot" [ 12.776860] 0x000000200000-0x000000280000 : "quick_boot_cfg " [ 12.783598] 0x000000280000-0x000000300000 : "face_db" [ 12.789703] 0x000000300000-0x000000340000 : "sensor_cfg" [ 12.795985] 0x000000640000-0x000000840000 : "speckle" [ 12.802078] 0x000000a00000-0x000000fc0000 : "rttapp" [ 12.808035] 0x000000840000-0x000000a00000 : "rttk" [ 12.813848] 0x000000fc0000-0x0000016c0000 : "linux" [ 12.819723] 0x0000016c0000-0x000001fc0000 : "rootfs" [ 12.825732] 0x000000000000-0x000002000000 : "all_flash" [ 12.832092] ------------[ cut here ]------------ [ 12.836762] dw_spi_mmio 91582000.spi: device non-coherent but no non-coherent operations supported [ 12.836773] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 12.836789] Modules linked in: [ 12.836795] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 12.836801] Hardware name: Canaan Kendryte K230 (DT) [ 12.836804] epc : arch_setup_dma_ops+0x7a/0xa8 [ 12.836809] ra : arch_setup_dma_ops+0x7a/0xa8 [ 12.836814] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000bb70 [ 12.836818] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff816465c8 [ 12.836822] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000bba0 [ 12.836825] s1 : 0000000000000000 a0 : 0000000000000056 a1 : ffffffff8167bf20 [ 12.836828] a2 : 000000000000089b a3 : 0000000000000001 a4 : 0000000000000000 [ 12.836831] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000038 [ 12.836834] s2 : ffffffd801b46410 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 12.836837] s5 : ffffffd81fd92e08 s6 : ffffffd8029bc7e8 s7 : ffffffff80e1a6b8 [ 12.836840] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 12.836844] s11: 0000000000000000 t3 : ffffffff81800b67 t4 : ffffffff81800b67 [ 12.836847] t5 : ffffffff81800b68 t6 : ffffffc80000b988 [ 12.836850] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 12.836853] [] arch_setup_dma_ops+0x7a/0xa8 [ 12.836859] [] of_dma_configure_id+0xf8/0x278 [ 12.836867] [] platform_dma_configure+0x44/0x5a [ 12.836876] [] really_probe+0x54/0x23e [ 12.836882] [] __driver_probe_device+0x5c/0xda [ 12.836887] [] driver_probe_device+0x2c/0xf8 [ 12.836892] [] __driver_attach+0x6c/0x15a [ 12.836897] [] bus_for_each_dev+0x60/0xae [ 12.836902] [] driver_attach+0x1a/0x22 [ 12.836907] [] bus_add_driver+0xd0/0x1ba [ 12.836912] [] driver_register+0x3e/0xd8 [ 12.836918] [] __platform_driver_register+0x1c/0x24 [ 12.836925] [] dw_spi_mmio_driver_init+0x1a/0x22 [ 12.836934] [] do_one_initcall+0x60/0x1f0 [ 12.836939] [] kernel_init_freeable+0x1d2/0x234 [ 12.836948] [] kernel_init+0x1e/0x112 [ 12.836953] [] ret_from_fork+0xe/0x1c [ 12.836960] ---[ end trace 0000000000000000 ]--- [ 13.067335] dw_spi_mmio 91582000.spi: DMA init failed [ 13.075910] usbcore: registered new interface driver catc [ 13.081381] usbcore: registered new interface driver kaweth [ 13.086961] pegasus: Pegasus/Pegasus II USB Ethernet driver [ 13.092556] usbcore: registered new interface driver pegasus [ 13.098239] usbcore: registered new interface driver rtl8150 [ 13.103933] usbcore: registered new device driver r8152-cfgselector [ 13.110224] usbcore: registered new interface driver r8152 [ 13.115731] usbcore: registered new interface driver lan78xx [ 13.121411] usbcore: registered new interface driver asix [ 13.126833] usbcore: registered new interface driver ax88179_178a [ 13.132948] usbcore: registered new interface driver cdc_ether [ 13.138807] usbcore: registered new interface driver net1080 [ 13.144488] usbcore: registered new interface driver cdc_subset [ 13.150433] usbcore: registered new interface driver zaurus [ 13.156041] usbcore: registered new interface driver cdc_ncm [ 13.161725] usbcore: registered new interface driver r8153_ecm [ 13.167688] ------------[ cut here ]------------ [ 13.172313] dwc2 91500000.usb-otg: device non-coherent but no non-coherent operations supported [ 13.172323] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 13.172339] Modules linked in: [ 13.172345] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 13.172351] Hardware name: Canaan Kendryte K230 (DT) [ 13.172354] epc : arch_setup_dma_ops+0x7a/0xa8 [ 13.172359] ra : arch_setup_dma_ops+0x7a/0xa8 [ 13.172364] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000bb70 [ 13.172368] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81647a68 [ 13.172372] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000bba0 [ 13.172375] s1 : 0000000000000000 a0 : 0000000000000053 a1 : ffffffff8167c4c0 [ 13.172378] a2 : 00000000000008d7 a3 : 0000000000000001 a4 : 0000000000000000 [ 13.172381] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000038 [ 13.172384] s2 : ffffffd801b47c10 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 13.172388] s5 : ffffffd81fd96398 s6 : ffffffd802a4f2a8 s7 : ffffffff80e1a798 [ 13.172392] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 13.172395] s11: 0000000000000000 t3 : ffffffff81800b67 t4 : ffffffff81800b67 [ 13.172398] t5 : ffffffff81800b68 t6 : ffffffc80000b988 [ 13.172401] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 13.172404] [] arch_setup_dma_ops+0x7a/0xa8 [ 13.172411] [] of_dma_configure_id+0xf8/0x278 [ 13.172419] [] platform_dma_configure+0x44/0x5a [ 13.172428] [] really_probe+0x54/0x23e [ 13.172434] [] __driver_probe_device+0x5c/0xda [ 13.172440] [] driver_probe_device+0x2c/0xf8 [ 13.172445] [] __driver_attach+0x6c/0x15a [ 13.172450] [] bus_for_each_dev+0x60/0xae [ 13.172455] [] driver_attach+0x1a/0x22 [ 13.172460] [] bus_add_driver+0xd0/0x1ba [ 13.172465] [] driver_register+0x3e/0xd8 [ 13.172471] [] __platform_driver_register+0x1c/0x24 [ 13.172478] [] dwc2_platform_driver_init+0x1a/0x22 [ 13.172487] [] do_one_initcall+0x60/0x1f0 [ 13.172492] [] kernel_init_freeable+0x1d2/0x234 [ 13.172501] [] kernel_init+0x1e/0x112 [ 13.172506] [] ret_from_fork+0xe/0x1c [ 13.172513] ---[ end trace 0000000000000000 ]--- [ 13.521674] dwc2 91500000.usb-otg: EPs: 7, dedicated fifos, 3016 entries in SPRAM [ 13.529295] dwc2 91500000.usb-otg: DWC OTG Controller [ 13.534383] dwc2 91500000.usb-otg: new USB bus registered, assigned bus number 1 [ 13.541809] dwc2 91500000.usb-otg: irq 17, io mem 0x91500000 [ 13.547608] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 13.555886] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.563116] usb usb1: Product: DWC OTG Controller [ 13.567824] usb usb1: Manufacturer: Linux 6.7.0-rc4+ dwc2_hsotg [ 13.573749] usb usb1: SerialNumber: 91500000.usb-otg [ 13.579155] hub 1-0:1.0: USB hub found [ 13.582977] hub 1-0:1.0: 1 port detected [ 13.587450] ------------[ cut here ]------------ [ 13.592115] dwc2 91540000.usb-otg: device non-coherent but no non-coherent operations supported [ 13.592127] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 13.592143] Modules linked in: [ 13.592149] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 13.592156] Hardware name: Canaan Kendryte K230 (DT) [ 13.592158] epc : arch_setup_dma_ops+0x7a/0xa8 [ 13.592164] ra : arch_setup_dma_ops+0x7a/0xa8 [ 13.592169] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000bb70 [ 13.592173] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81648b40 [ 13.592177] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000bba0 [ 13.592180] s1 : 0000000000000000 a0 : 0000000000000053 a1 : ffffffff8167c958 [ 13.592184] a2 : 0000000000000908 a3 : 0000000000000001 a4 : 0000000000000000 [ 13.592187] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000038 [ 13.592190] s2 : ffffffd801b48010 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 13.592193] s5 : ffffffd81fd96900 s6 : ffffffd802a4f2a8 s7 : ffffffff80e1a798 [ 13.592197] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 13.592201] s11: 0000000000000000 t3 : ffffffff81800b67 t4 : ffffffff81800b67 [ 13.592204] t5 : ffffffff81800b68 t6 : ffffffc80000b988 [ 13.592207] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 13.592211] [] arch_setup_dma_ops+0x7a/0xa8 [ 13.592218] [] of_dma_configure_id+0xf8/0x278 [ 13.592226] [] platform_dma_configure+0x44/0x5a [ 13.592236] [] really_probe+0x54/0x23e [ 13.592242] [] __driver_probe_device+0x5c/0xda [ 13.592248] [] driver_probe_device+0x2c/0xf8 [ 13.592253] [] __driver_attach+0x6c/0x15a [ 13.592259] [] bus_for_each_dev+0x60/0xae [ 13.592264] [] driver_attach+0x1a/0x22 [ 13.592270] [] bus_add_driver+0xd0/0x1ba [ 13.592275] [] driver_register+0x3e/0xd8 [ 13.592282] [] __platform_driver_register+0x1c/0x24 [ 13.592289] [] dwc2_platform_driver_init+0x1a/0x22 [ 13.592298] [] do_one_initcall+0x60/0x1f0 [ 13.592304] [] kernel_init_freeable+0x1d2/0x234 [ 13.592314] [] kernel_init+0x1e/0x112 [ 13.592320] [] ret_from_fork+0xe/0x1c [ 13.592327] ---[ end trace 0000000000000000 ]--- [ 13.823655] dwc2 91540000.usb-otg: DWC OTG Controller [ 13.828760] dwc2 91540000.usb-otg: new USB bus registered, assigned bus number 2 [ 13.836190] dwc2 91540000.usb-otg: irq 18, io mem 0x91540000 [ 13.842033] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 13.850320] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.857548] usb usb2: Product: DWC OTG Controller [ 13.862258] usb usb2: Manufacturer: Linux 6.7.0-rc4+ dwc2_hsotg [ 13.868180] usb usb2: SerialNumber: 91540000.usb-otg [ 13.873586] hub 2-0:1.0: USB hub found [ 13.877407] hub 2-0:1.0: 1 port detected [ 13.882945] usbcore: registered new interface driver usb-storage [ 13.889515] i2c_dev: i2c /dev entries driver [ 13.894482] ------------[ cut here ]------------ [ 13.899137] dw_wdt 91106000.wdt0: device non-coherent but no non-coherent operations supported [ 13.899148] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 13.899165] Modules linked in: [ 13.899170] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S 6.7.0-rc4+ #25 [ 13.899177] Hardware name: Canaan Kendryte K230 (DT) [ 13.899180] epc : arch_setup_dma_ops+0x7a/0xa8 [ 13.899185] ra : arch_setup_dma_ops+0x7a/0xa8 [ 13.899190] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80000bb70 [ 13.899194] gp : ffffffff817eb648 tp : ffffffd801b58000 t0 : ffffffff81649c70 [ 13.899198] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80000bba0 [ 13.899201] s1 : 0000000000000000 a0 : 0000000000000052 a1 : ffffffff8167ce08 [ 13.899205] a2 : 000000000000093a a3 : 0000000000000001 a4 : 0000000000000000 [ 13.899208] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000038 [ 13.899211] s2 : ffffffd801d7d410 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 13.899215] s5 : ffffffd81fdd5338 s6 : ffffffd802a5f8a8 s7 : ffffffff80e1a800 [ 13.899218] s8 : 0000000000000008 s9 : ffffffff80c000ac s10: 0000000000000000 [ 13.899221] s11: 0000000000000000 t3 : ffffffff81800b67 t4 : ffffffff81800b67 [ 13.899225] t5 : ffffffff81800b68 t6 : ffffffc80000b988 [ 13.899228] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 13.899231] [] arch_setup_dma_ops+0x7a/0xa8 [ 13.899238] [] of_dma_configure_id+0xf8/0x278 [ 13.899246] [] platform_dma_configure+0x44/0x5a [ 13.899255] [] really_probe+0x54/0x23e [ 13.899261] [] __driver_probe_device+0x5c/0xda [ 13.899266] [] driver_probe_device+0x2c/0xf8 [ 13.899271] [] __driver_attach+0x6c/0x15a [ 13.899276] [] bus_for_each_dev+0x60/0xae [ 13.899281] [] driver_attach+0x1a/0x22 [ 13.899286] [] bus_add_driver+0xd0/0x1ba [ 13.899291] [] driver_register+0x3e/0xd8 [ 13.899297] [] __platform_driver_register+0x1c/0x24 [ 13.899304] [] dw_wdt_driver_init+0x1a/0x22 [ 13.899312] [] do_one_initcall+0x60/0x1f0 [ 13.899317] [] kernel_init_freeable+0x1d2/0x234 [ 13.899326] [] kernel_init+0x1e/0x112 [ 13.899331] [] ret_from_fork+0xe/0x1c [ 13.899338] ---[ end trace 0000000000000000 ]--- [ 13.900476] sdhci: Secure Digital Host Controller Interface driver [ 14.136010] sdhci: Copyright(c) Pierre Ossman [ 14.140372] sdhci-pltfm: SDHCI platform and OF driver helper [ 14.146937] ------------[ cut here ]------------ [ 14.151594] sdhci-dwcmshc-kendryte 91580000.sdhci0: device non-coherent but no non-coherent operations supported [ 14.151605] WARNING: CPU: 0 PID: 22 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 14.151622] Modules linked in: [ 14.151628] CPU: 0 PID: 22 Comm: kworker/u2:1 Tainted: G S 6.7.0-rc4+ #25 [ 14.151634] Hardware name: Canaan Kendryte K230 (DT) [ 14.151638] Workqueue: events_unbound async_run_entry_fn [ 14.151647] epc : arch_setup_dma_ops+0x7a/0xa8 [ 14.151653] ra : arch_setup_dma_ops+0x7a/0xa8 [ 14.151658] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc8001d3c30 [ 14.151662] gp : ffffffff817eb648 tp : ffffffd801b66e00 t0 : ffffffff8164aa88 [ 14.151666] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc8001d3c60 [ 14.151669] s1 : 0000000000000000 a0 : 0000000000000064 a1 : ffffffff8167d1e0 [ 14.151672] a2 : 0000000000000963 a3 : 0000000000000001 a4 : 0000000000000000 [ 14.151676] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000038 [ 14.151679] s2 : ffffffd801b45810 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 14.151683] s5 : ffffffd81fd8f978 s6 : ffffffff817afe88 s7 : ffffffd801d92a80 [ 14.151686] s8 : ffffffff818279c0 s9 : ffffffff80fdd5c0 s10: ffffffd801a58000 [ 14.151690] s11: ffffffd801d92ac0 t3 : ffffffff81800b67 t4 : ffffffff81800b67 [ 14.151693] t5 : ffffffff81800b68 t6 : ffffffc8001d3a48 [ 14.151696] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 14.151700] [] arch_setup_dma_ops+0x7a/0xa8 [ 14.151707] [] of_dma_configure_id+0xf8/0x278 [ 14.151714] [] platform_dma_configure+0x44/0x5a [ 14.151723] [] really_probe+0x54/0x23e [ 14.151729] [] __driver_probe_device+0x5c/0xda [ 14.151734] [] driver_probe_device+0x2c/0xf8 [ 14.151739] [] __driver_attach_async_helper+0x36/0x7e [ 14.151745] [] async_run_entry_fn+0x1e/0xa6 [ 14.151751] [] process_one_work+0x16a/0x32a [ 14.151760] [] worker_thread+0x33e/0x480 [ 14.151764] [] kthread+0xc4/0xe0 [ 14.151771] [] ret_from_fork+0xe/0x1c [ 14.151779] ---[ end trace 0000000000000000 ]--- [ 14.360783] ------------[ cut here ]------------ [ 14.365416] sdhci-dwcmshc-kendryte 91581000.sdhci1: device non-coherent but no non-coherent operations supported [ 14.365426] WARNING: CPU: 0 PID: 11 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 14.365442] Modules linked in: [ 14.365448] CPU: 0 PID: 11 Comm: kworker/u2:0 Tainted: G S 6.7.0-rc4+ #25 [ 14.365454] Hardware name: Canaan Kendryte K230 (DT) [ 14.365458] Workqueue: events_unbound async_run_entry_fn [ 14.365467] epc : arch_setup_dma_ops+0x7a/0xa8 [ 14.365473] ra : arch_setup_dma_ops+0x7a/0xa8 [ 14.365477] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc80005bc30 [ 14.365482] gp : ffffffff817eb648 tp : ffffffd801b5ee00 t0 : ffffffff8164b9a8 [ 14.365485] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc80005bc60 [ 14.365489] s1 : 0000000000000000 a0 : 0000000000000064 a1 : ffffffff8167d600 [ 14.365492] a2 : 000000000000098f a3 : 0000000000000001 a4 : 0000000000000000 [ 14.365496] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000038 [ 14.365500] s2 : ffffffd801b45c10 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 14.365504] s5 : ffffffd81fd90148 s6 : ffffffff817afe88 s7 : ffffffd801b20a80 [ 14.365507] s8 : ffffffff818279c0 s9 : ffffffff80fdd5c0 s10: ffffffd801a58000 [ 14.365510] s11: ffffffd801b20ac0 t3 : ffffffff81800b67 t4 : ffffffff81800b67 [ 14.365513] t5 : ffffffff81800b68 t6 : ffffffc80005ba48 [ 14.365515] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 14.365519] [] arch_setup_dma_ops+0x7a/0xa8 [ 14.365526] [] of_dma_configure_id+0xf8/0x278 [ 14.365534] [] platform_dma_configure+0x44/0x5a [ 14.365543] [] really_probe+0x54/0x23e [ 14.365549] [] __driver_probe_device+0x5c/0xda [ 14.365554] [] driver_probe_device+0x2c/0xf8 [ 14.365560] [] __driver_attach_async_helper+0x36/0x7e [ 14.365566] [] async_run_entry_fn+0x1e/0xa6 [ 14.365572] [] process_one_work+0x16a/0x32a [ 14.365581] [] worker_thread+0x33e/0x480 [ 14.365586] [] kthread+0xc4/0xe0 [ 14.365592] [] ret_from_fork+0xe/0x1c [ 14.365601] ---[ end trace 0000000000000000 ]--- [ 14.574307] sdhci-dwcmshc-kendryte 91581000.sdhci1: Got CD GPIO [ 14.580390] ledtrig-cpu: registered to indicate activity on CPUs [ 14.586565] usbcore: registered new interface driver usbhid [ 14.592153] usbhid: USB HID core driver [ 14.596244] riscv-pmu-sbi: SBI PMU extension is available [ 14.601705] riscv-pmu-sbi: 16 firmware and 18 hardware counters [ 14.607634] riscv-pmu-sbi: Perf sampling/filtering is not supported as sscof extension is not available [ 14.617723] NET: Registered PF_INET6 protocol family [ 14.623869] Segment Routing with IPv6 [ 14.627608] In-situ OAM (IOAM) with IPv6 [ 14.631598] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 14.638008] NET: Registered PF_PACKET protocol family [ 14.643133] lib80211: common routines for IEEE802.11 drivers [ 14.648856] 9pnet: Installing 9P2000 support [ 14.653194] Key type dns_resolver registered [ 14.662657] Loading compiled-in X.509 certificates [ 14.679001] ------------[ cut here ]------------ [ 14.683680] k230-clk-composite 91100000.sysctl_clock:usb_clk480: device non-coherent but no non-coherent operations supported [ 14.683693] WARNING: CPU: 0 PID: 27 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 14.683712] Modules linked in: [ 14.683717] CPU: 0 PID: 27 Comm: kworker/u2:2 Tainted: G S 6.7.0-rc4+ #25 [ 14.683724] Hardware name: Canaan Kendryte K230 (DT) [ 14.683727] Workqueue: events_unbound deferred_probe_work_func [ 14.683737] epc : arch_setup_dma_ops+0x7a/0xa8 [ 14.683743] ra : arch_setup_dma_ops+0x7a/0xa8 [ 14.683748] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc8001fbb20 [ 14.683752] gp : ffffffff817eb648 tp : ffffffd801c12c00 t0 : ffffffff8164cea0 [ 14.683756] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc8001fbb50 [ 14.683760] s1 : 0000000000000000 a0 : 0000000000000071 a1 : ffffffff8167dbb8 [ 14.683763] a2 : 00000000000009cc a3 : 0000000000000001 a4 : 0000000000000000 [ 14.683766] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000038 [ 14.683769] s2 : ffffffd801d76410 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 14.683773] s5 : ffffffd81fdcaba0 s6 : ffffffff817afe88 s7 : ffffffd801debf00 [ 14.683776] s8 : ffffffff818279c0 s9 : ffffffff80fdd5c0 s10: ffffffd801a58000 [ 14.683779] s11: ffffffd801debf40 t3 : ffffffff81800b67 t4 : ffffffff81800b67 [ 14.683783] t5 : ffffffff81800b68 t6 : ffffffc8001fb938 [ 14.683786] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 14.683790] [] arch_setup_dma_ops+0x7a/0xa8 [ 14.683797] [] of_dma_configure_id+0xf8/0x278 [ 14.683805] [] platform_dma_configure+0x44/0x5a [ 14.683813] [] really_probe+0x54/0x23e [ 14.683819] [] __driver_probe_device+0x5c/0xda [ 14.683824] [] driver_probe_device+0x2c/0xf8 [ 14.683830] [] __device_attach_driver+0x6e/0xd0 [ 14.683835] [] bus_for_each_drv+0x64/0xba [ 14.683840] [] __device_attach+0x82/0x136 [ 14.683846] [] device_initial_probe+0xe/0x16 [ 14.683851] [] bus_probe_device+0x86/0x88 [ 14.683856] [] deferred_probe_work_func+0x70/0xa6 [ 14.683861] [] process_one_work+0x16a/0x32a [ 14.683871] [] worker_thread+0x33e/0x480 [ 14.683876] [] kthread+0xc4/0xe0 [ 14.683883] [] ret_from_fork+0xe/0x1c [ 14.683892] ---[ end trace 0000000000000000 ]--- [ 14.684238] ------------[ cut here ]------------ [ 14.921597] k230-clk-composite 91100000.sysctl_clock:dphy_test_clk: device non-coherent but no non-coherent operations supported [ 14.921607] WARNING: CPU: 0 PID: 27 at arch/riscv/mm/dma-noncoherent.c:140 arch_setup_dma_ops+0x7a/0xa8 [ 14.921623] Modules linked in: [ 14.921628] CPU: 0 PID: 27 Comm: kworker/u2:2 Tainted: G S 6.7.0-rc4+ #25 [ 14.921634] Hardware name: Canaan Kendryte K230 (DT) [ 14.921638] Workqueue: events_unbound deferred_probe_work_func [ 14.921646] epc : arch_setup_dma_ops+0x7a/0xa8 [ 14.921652] ra : arch_setup_dma_ops+0x7a/0xa8 [ 14.921657] epc : ffffffff8000e0d2 ra : ffffffff8000e0d2 sp : ffffffc8001fbb20 [ 14.921661] gp : ffffffff817eb648 tp : ffffffd801c12c00 t0 : ffffffff8164dbb0 [ 14.921665] t1 : 000000000000002d t2 : 2d2d2d2d2d2d2d2d s0 : ffffffc8001fbb50 [ 14.921668] s1 : 0000000000000000 a0 : 0000000000000074 a1 : ffffffff8167df48 [ 14.921671] a2 : 00000000000009f2 a3 : 0000000000000001 a4 : 0000000000000000 [ 14.921675] a5 : 0000000000000000 a6 : ffffffff81617028 a7 : 0000000000000038 [ 14.921678] s2 : ffffffd801d76c10 s3 : ffffffff817ef10c s4 : ffffffffffffffed [ 14.921682] s5 : ffffffd81fdcbdc0 s6 : ffffffff817afe88 s7 : ffffffd801debf00 [ 14.921685] s8 : ffffffff818279c0 s9 : ffffffff80fdd5c0 s10: ffffffd801a58000 [ 14.921689] s11: ffffffd801debf40 t3 : ffffffff81800b67 t4 : ffffffff81800b67 [ 14.921692] t5 : ffffffff81800b68 t6 : ffffffc8001fb938 [ 14.921695] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 14.921698] [] arch_setup_dma_ops+0x7a/0xa8 [ 14.921705] [] of_dma_configure_id+0xf8/0x278 [ 14.921712] [] platform_dma_configure+0x44/0x5a [ 14.921720] [] really_probe+0x54/0x23e [ 14.921725] [] __driver_probe_device+0x5c/0xda [ 14.921730] [] driver_probe_device+0x2c/0xf8 [ 14.921735] [] __device_attach_driver+0x6e/0xd0 [ 14.921740] [] bus_for_each_drv+0x64/0xba [ 14.921745] [] __device_attach+0x82/0x136 [ 14.921750] [] device_initial_probe+0xe/0x16 [ 14.921755] [] bus_probe_device+0x86/0x88 [ 14.921760] [] deferred_probe_work_func+0x70/0xa6 [ 14.921765] [] process_one_work+0x16a/0x32a [ 14.921774] [] worker_thread+0x33e/0x480 [ 14.921778] [] kthread+0xc4/0xe0 [ 14.921785] [] ret_from_fork+0xe/0x1c [ 14.921794] ---[ end trace 0000000000000000 ]--- [ 15.154979] mmc0: SDHCI controller on 91580000.sdhci0 [91580000.sdhci0] using ADMA [ 15.164259] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 15.171786] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 15.183658] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 15.189390] clk: Disabling unused clocks [ 15.193816] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 15.202477] cfg80211: failed to load regulatory.db [ 15.207797] mmc1: SDHCI controller on 91581000.sdhci1 [91581000.sdhci1] using ADMA [ 15.216446] Freeing unused kernel image (initmem) memory: 4040K [ 15.222430] usb 1-1: new high-speed USB device number 2 using dwc2 [ 15.228690] usb 2-1: new full-speed USB device number 2 using dwc2 [ 15.235751] mmc1: Got command interrupt 0x00000001 even though no command operation was in progress. [ 15.244892] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== [ 15.251331] mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00000005 [ 15.257769] mmc1: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [ 15.264207] mmc1: sdhci: Argument: 0x80000c08 | Trn mode: 0x00000000 [ 15.270645] mmc1: sdhci: Present: 0x01ff0000 | Host ctl: 0x00000001 [ 15.277084] mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000000 [ 15.283521] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x00007d07 [ 15.289959] mmc1: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 [ 15.296396] mmc1: sdhci: Int enab: 0x00ff1003 | Sig enab: 0x00ff1003 [ 15.302834] mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000 [ 15.309272] mmc1: sdhci: Caps: 0x276a6481 | Caps_1: 0x08008071 [ 15.315709] mmc1: sdhci: Cmd: 0x0000341a | Max curr: 0x00000000 [ 15.322146] mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 [ 15.328584] mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 [ 15.335021] mmc1: sdhci: Host ctl2: 0x00000000 [ 15.339461] mmc1: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000 [ 15.345898] mmc1: sdhci: ============================================ [ 15.353697] Run /sbin/init as init process [ 15.392540] mmc1: ADMA error: 0x02000000 [ 15.396475] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== [ 15.402914] mmc1: sdhci: Sys addr: 0x00000001 | Version: 0x00000005 [ 15.409353] mmc1: sdhci: Blk size: 0x00007008 | Blk cnt: 0x00000000 [ 15.415791] mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 [ 15.422229] mmc1: sdhci: Present: 0x01ff0202 | Host ctl: 0x00000011 [ 15.428668] mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000000 [ 15.435105] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x00007d07 [ 15.441543] mmc1: sdhci: Timeout: 0x00000004 | Int stat: 0x00000001 [ 15.447980] mmc1: sdhci: Int enab: 0x03ff100b | Sig enab: 0x03ff100b [ 15.454418] mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000 [ 15.460856] mmc1: sdhci: Caps: 0x276a6481 | Caps_1: 0x08008071 [ 15.467294] mmc1: sdhci: Cmd: 0x0000333a | Max curr: 0x00000000 [ 15.473732] mmc1: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x01dbd37f [ 15.480170] mmc1: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x00400e00 [ 15.486608] mmc1: sdhci: Host ctl2: 0x00000000 [ 15.491049] mmc1: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x02c77200 [ 15.497486] mmc1: sdhci: ============================================ [ 15.503923] mmc1: sdhci: 02c77200: DMA 0x02ca3258, LEN 0x0008, Attr=0x21 [ 15.510622] mmc1: sdhci: 02c77208: DMA 0x00000000, LEN 0x0000, Attr=0x03 [ 15.565686] mmc1: error -5 whilst initialising SD card [ 15.641739] usb 2-1: device descriptor read/64, error -71 [ 15.647191] usb 1-1: device descriptor read/64, error -32 [ 15.658433] mmc1: ADMA error: 0x02000000 [ 15.662367] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== [ 15.668805] mmc1: sdhci: Sys addr: 0x00000001 | Version: 0x00000005 [ 15.675245] mmc1: sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000000 [ 15.681683] mmc1: sdhci: Argument: 0x00fffff0 | Trn mode: 0x00000013 [ 15.688120] mmc1: sdhci: Present: 0x01ff0202 | Host ctl: 0x00000011 [ 15.694559] mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000000 [ 15.700997] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x0000a707 [ 15.707435] mmc1: sdhci: Timeout: 0x00000004 | Int stat: 0x00000001 [ 15.713872] mmc1: sdhci: Int enab: 0x03ff100b | Sig enab: 0x03ff100b [ 15.720310] mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000 [ 15.726747] mmc1: sdhci: Caps: 0x276a6481 | Caps_1: 0x08008071 [ 15.733185] mmc1: sdhci: Cmd: 0x0000063a | Max curr: 0x00000000 [ 15.739622] mmc1: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x01dbd37f [ 15.746061] mmc1: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x00400e00 [ 15.752499] mmc1: sdhci: Host ctl2: 0x00000000 [ 15.756940] mmc1: sdhci: ADMA Err: 0x00000007 | ADMA Ptr: 0x02c77208 [ 15.763378] mmc1: sdhci: ============================================ [ 15.769814] mmc1: sdhci: 02c77200: DMA 0x02c744c0, LEN 0x0040, Attr=0x21 [ 15.776514] mmc1: sdhci: 02c77208: DMA 0x00000000, LEN 0x0000, Attr=0x03 [ 15.837709] mmc1: error -5 whilst initialising SD card Please press Enter to activate this console.